We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR2 DIMM sticks with gold contacts

Simmtec, Inc

Simmtec, Inc 8GB (4 x 2GB) DDR2 DIMM 240 PIN 800Mhz PC2 6400 / PC2 6300

SKU CH-3GXA-1ZWP7

Four-module DDR2 kit provides 8 GB at 800 MHz with 1.8 V operation for desktop upgrades

  • Capacity8GB (4 x 2GB)
  • 8GB total capacity from four matched 2GB modules
  • 800MHz DDR2 speed rated for PC2-6400 and PC2-6300
  • 240-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design for mainstream desktop compatibility
  • Every module tested at 1.8V before shipment

8GB DDR2 DIMM kit for desktop upgrades

This kit provides eight gigabytes of DDR2 memory in four 2GB modules. It suits owners of older desktop systems that use 240-pin DIMM slots and require PC2-6300 or PC2-6400 speeds. The unbuffered, non-ECC design matches standard consumer motherboards from the DDR2 era.

Straightforward 240-pin installation

Each module keys into a standard 240-pin DDR2 slot at 1.8 volts. Problems usually arise when mixing these sticks with modules of different voltages, speeds or ranks, which can prevent the system from posting. Installing all four identical modules together avoids timing mismatches.

PC2-6300/PC2-6400 speed rating decides fit

The kit is rated for 800 MHz operation under both PC2-6300 and PC2-6400 specifications. If the motherboard only supports lower DDR2 speeds, the memory will not run at its rated frequency. Buyers needing ECC, registered or lower-voltage DDR2 should choose a different product.

Highlights

  • 8GB total capacity from four matched 2GB modules
  • 800MHz DDR2 speed rated for PC2-6400 and PC2-6300
  • 240-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design for mainstream desktop compatibility
  • Every module tested at 1.8V before shipment

Specifications

Capacity8GB (4 x 2GB)

Questions about this item

How can I confirm the DDR2 kit is running at 800MHz after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 800MHz with PC2-6400 or PC2-6300 timings shown.

What exactly ships in the box and is anything else required to use the 8GB DDR2 kit?

The package contains four 2GB DDR2 DIMMs; no extra cables, brackets or software are needed — just open DIMM slots on a desktop motherboard.

The listing shows PC2-6300 and PC2-6400 — which one should I pick for my system?

Both ratings refer to the same 800MHz modules; the kit will operate at whichever speed your motherboard supports, so no separate version choice is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.