暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 memory module with gold edge connector and black chips

Simmtec, Inc

Simmtec, Inc 8GB DDR3-1333 PC3-10600 2Rx8 240-Pin 1.35V desktop RAM

SKU CH-B0QK-Z2M4S

An 8 GB DDR3 module running at 1333 MHz with a low 1.35 V operating voltage and 240-pin UDIMM form factor for desktop upgrades

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • 8GB capacity handles everyday multitasking
  • DDR3-1333MHz speed delivers responsive performance
  • PC3-10600 rating matches standard system requirements
  • 35V low-voltage operation reduces power draw
  • 240-pin UDIMM form factor fits desktop motherboards

8GB DDR3-1333 Desktop Module

This Simmtec, Inc 8GB DDR3-1333 module upgrades desktop PCs with a single 240-pin UDIMM. It runs at PC3-10600 speed and operates at a low 1.35V. The non-ECC, unbuffered design fits standard consumer motherboards.

Ideal for Basic Upgrades

This module suits users restoring older DDR3 systems or adding capacity to compatible platforms. It is not for builders needing ECC error correction or registered signal buffering. Buyers requiring faster DDR3 speeds or different voltage specifications should look elsewhere.

240-Pin 1.35V DDR3 Interface

The 240-pin DDR3 interface running at 1.35V is the decisive specification. Your motherboard must support DDR3 UDIMMs at this exact voltage and pin count. Verify the manual before purchase to ensure the module will be recognised and stable.

特長

  • 8GB capacity handles everyday multitasking
  • DDR3-1333MHz speed delivers responsive performance
  • PC3-10600 rating matches standard system requirements
  • 35V low-voltage operation reduces power draw
  • 240-pin UDIMM form factor fits desktop motherboards

仕様

Capacity8GB
SpeedDDR3 1333 (PC3 10600)

この商品に関する質問

Will the 240-pin DDR3 module fit my desktop motherboard?

The module uses the standard 240-pin DDR3 UDIMM form factor. It fits any desktop board with a DDR3 slot keyed for 1.35 V operation.

What is the correct way to seat the 1.35 V DDR3 stick, and what step do people often miss?

Align the notch with the slot key, press straight down until both side clips click, then verify the module sits level. The step most often missed is pressing firmly enough to engage both clips fully.

When should I consider replacing this 8 GB DDR3-1333 module?

Replace it if memory diagnostics report errors, if the system becomes unstable under load, or if you upgrade to a platform that no longer supports DDR3.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。