BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
SK hynix
Two 4 GB unbuffered DDR4 DIMMs running at 2133 MT/s with CL15 latency and 1.20 V
This SK hynix kit provides 8 GB of DDR4 desktop memory in two 4 GB modules. It runs at DDR4-2133 with a CAS latency of 15 and operates at 1.20 V. The unbuffered, non-ECC DIMMs are suited for standard desktop builds and upgrades.
Verify that your motherboard has free 288-pin DDR4 slots and supports 1.20 V operation. The board must accept unbuffered, non-ECC modules at DDR4-2133. Confirm the maximum memory capacity and slot population rules in the motherboard manual before ordering.
The two modules are packaged together as a matched set, allowing the memory controller to run in dual-channel mode when installed in the correct slots. This configuration can increase memory throughput compared with a single module of the same total capacity. No additional software or accessories are included.
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMA451U6AFR8N-TF |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Yes, each module is a 288-pin DIMM built for DDR4 desktop slots, so they install in any board that accepts DDR4 memory.
CL15 is the CAS latency timing and 2133 MT/s is the data rate; together they set the module's baseline speed and response time at the standard 1.20 V.
The kit is rated for DDR4-2133 at CL15 using the standard 1.20 V; most motherboards will apply those settings automatically on first boot.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?