暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

STARTECH

STARTECH 25SATSAS35 2.5in SATA/SAS to 3.5in SATA hdd accessory

SKU CH-235P-Z598S MPN 25SATSAS35

Converts a 2.5in SATA or SAS drive into a 3.5in SATA form factor using a trayless plastic bracket with a 29-pin SFF-8482 receptacle

  • ColorBlack
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • SpecificationsColor: Black Drive Connectors: 1 - SFF-8482 (29 pin; Data &
  • FeaturesTrayless design: hard drives are not mounted into separate t

Option 3.5in SATA Enclosure - 2.5 in SATA/SAS Drive

  • Fits 2.5in SATA or SAS drives into 3.5in bays using SFF-8482 connector
  • Supports drives up to 15mm height without extra trays
  • Direct SATA and SAS signal pass-through with no protocol conversion
  • Standard 3.5in mounting holes align with desktop chassis
  • Black plastic enclosure protects drive during installation

2.5 to 3.5 SATA SAS converter

This adapter converts a 2.5in SATA or SAS drive into a 3.5in SATA form factor. It suits builders fitting laptop or enterprise drives into desktop bays. The tray-less design allows direct insertion without extra mounting hardware. Drives up to 15mm in height are supported.

Passive operation no fan

The unit has no fan and draws no auxiliary power. It relies on the host bay airflow for cooling. The plastic enclosure adds minimal thermal resistance. Operation is silent under normal use.

Standard 3.5in mounting points

The converter uses the host 3.5in bay screw holes for secure installation. It connects via a 29 pin SFF-8482 receptacle for data and power. No extra cables or controllers are required. The drive remains removable for quick swaps.

特長

  • Fits 2.5in SATA or SAS drives into 3.5in bays using SFF-8482 connector
  • Supports drives up to 15mm height without extra trays
  • Direct SATA and SAS signal pass-through with no protocol conversion
  • Standard 3.5in mounting holes align with desktop chassis
  • Black plastic enclosure protects drive during installation

仕様

BrandStarTech.com
Model25SATSAS35
ColorBlack
Conversion Tray1 x 2.5" Drive to 3.5" Bay
SpecificationsColor: Black
Drive Connectors: 1 - SFF-8482 (29 pin; Data & Power; Internal SAS) Receptacle
Drive Installation: Removable
Drive Size: 2.5in
Drive Type: SAS & SATA
Enclosure Type: Plastic
Fan(s): No
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Plug
Key Lock: No
Max Drive Height: 0.59 in [15 mm]
Number of 2.5 inch bays: 1
Number of Drives: 1
FeaturesTrayless design: hard drives are not mounted into separate trays/enclosures
Supports 2.5" form factor hard drives (HDD) and solid state drives (SSD) up to 15mm in height
Standard 3.5" hard drive mounting points along sides and bottom
Power indicator LED
Lightweight plastic construction with air vents
Plug and Play and hot swap compatible.
Turn Virtually any 2.5in SATA or SAS Hard Drive into a 3.5in SATA Drive
2.5 to 3.5 sata converter
2.5 to 3.5 SATA Aapter
2.5 to 3.5 SATA Bracket
2.5 to 3.5 Hard Drive Adapter
2.5 to 3.5 HDD Adapter
配送重量0.45 kg
梱包サイズ254 × 203 × 178 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install a 2.5in SATA or SAS drive into the 25SATSAS35 converter?

Slide the 2.5in drive into the open side until the 29-pin SFF-8482 receptacle engages, then mount the assembly using the standard 3.5in screw holes on the bottom and sides of the black plastic frame.

What maintenance or replacement will the 25SATSAS35 need over time?

The converter has no moving parts or fan; only the drive itself may need replacement, and the plastic frame can be reused indefinitely.

What limit appears first when the 25SATSAS35 runs continuously?

The 15mm height restriction for the 2.5in drive is the physical limit; thermal throttling depends on the host bay airflow since the tray has no fan.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。