Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
STARTECH
Converts a B-key M.2 SATA SSD into a 7 mm 2.5 in SATA drive at 6 Gbps with an open steel frame for heat dissipation
This open-frame adapter lets you install a B-key M.2 SATA SSD into any 7mm or larger 2.5in SATA bay. It accepts full-length NGFF modules including 2230, 2242, 2260 and 2280 sizes. The steel bracket provides mechanical support while exposing the drive for airflow. It is not compatible with M.2 NVMe or PCIe SSDs.
The open steel frame allows air to circulate directly around the M.2 module, helping to dissipate heat without adding a fan. Power is drawn solely from the host SATA 7+15-pin connector, so no extra cables or external supply are needed. The adapter itself adds negligible electrical load and produces no audible noise during operation.
The converter presents a standard 2.5in SATA form factor with a combined data and power receptacle, slotting straight into laptop drive cages, desktop hot-swap trays or external enclosures. It frees up an M.2 slot on the motherboard for other devices while letting you reuse existing 2.5in SATA infrastructure. Builders needing NVMe support or a sealed enclosure should look elsewhere.
| Brand | StarTech.com |
|---|---|
| Model | SAT32M225 |
| Color | Black |
| Conversion Tray | M.2 (NGFF) Drive to 2.5” Drive |
| Compatible Products | 2.5" |
| Specifications | Drive Connectors: 1 - M.2 (NGFF) Receptacle Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle Maximum Data Transfer Rate: 6 Gbps Type and Rate: SATA III (6 Gbps) |
| Features | Open-frame steel mounting bracket Supports 7mm or larger 2.5" SATA bays Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps) 2.5in SATA form factor housing Supports full length M.2 NGFF (Next Generation Form Factor) SSD Solid State Drives (2230, 2242, 2260, 2280) |
| 配送重量 | 0.09 kg |
| 梱包サイズ | 178 × 145 × 33 mm |
Insert the B-key M.2 SSD (2230, 2242, 2260 or 2280) into the M.2 receptacle, secure it with the mounting screw, then attach the open-frame steel bracket to the drive before sliding the assembly into the 2.5in SATA bay and connecting the 7+15 pin SATA data and power cable.
The adapter has no moving parts or firmware; it requires no scheduled maintenance. Replace it only if the SATA connector pins bend, the steel bracket cracks, or the M.2 retention screw strips.
The SATA III interface caps throughput at 6.0 Gbps, so sustained sequential reads and writes cannot exceed that bandwidth regardless of the M.2 SSD's own speed rating.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?