Supermicro
Supermicro SYS-6028U-TR4T+ 2U rack server 2x Xeon E5-2683 v4 2.1GHz 16-core 256GB DDR4 12x 3.5" bays
A 2U rack server with dual Xeon 16-core CPUs, 256GB DDR4, 12 hot-swap 3.5" bays and quad 10GBase-T networking
- Rack Height1U
- Redundant Hot-swap PowerYes
- CPU TypeIntel Xeon
- CPU Speed2.10 GHz
- CPU SocketLGA 2011-3
- Number of CPU Cores16-Core Processor
- Dual Xeon E5-2683 v4 processors deliver 32 total cores for heavy workloads
- 256GB DDR4 2400MHz ECC memory supports large virtualisation environments
- MegaRAID 9361-8i controller enables RAID 0, 1, 5, 6, 10, 50, 60
- 12 hot-swap 3.5" SATA/SAS drive bays provide high-capacity storage expansion
- Quad 10GBase-T ports via Intel X540 ensure fast network throughput
Dual-socket Xeon server for virtualization
This 2U rackmount system ships with two Intel Xeon E5-2683 v4 processors, each running at 2.1 GHz with 16 cores. A total of 256 GB of DDR4 2400 MHz registered ECC memory is installed across 8 DIMM slots, leaving 16 slots free for expansion up to the platform maximum of 1.5 TB. The board uses LGA 2011-3 sockets and the CSE-829UAC-R1K02-T chassis series.
Hot-swap drive bays and redundant titanium power
Twelve front-accessible 3.5-inch trays accept SATA or SAS drives and connect to the included LSI MegaRAID 9361-8i controller with 1 GB cache and battery backup. RAID levels 0, 1, 5, 6, 10, 50 and 60 are supported. Two 1000 W hot-swap power supplies provide redundancy. A dedicated RJ45 port gives IPMI 2.0 access with KVM-over-LAN and virtual media. Front bezel and rack rails are not included.
Quad 10GBase-T networking
The add-on card AOC-2UR-6-i4XT supplies four RJ45 10GBase-T ports driven by the Intel X540 controller. The MegaRAID 9361-8i handles eight SAS 12 Gb/s lanes, so four of the twelve bays require an additional controller or expander to be used. Video output is limited to the Matrox G200 with 8 MB memory, intended for management console use only.
特長
- Dual Xeon E5-2683 v4 processors deliver 32 total cores for heavy workloads
- 256GB DDR4 2400MHz ECC memory supports large virtualisation environments
- MegaRAID 9361-8i controller enables RAID 0, 1, 5, 6, 10, 50, 60
- 12 hot-swap 3.5" SATA/SAS drive bays provide high-capacity storage expansion
- Quad 10GBase-T ports via Intel X540 ensure fast network throughput
仕様
| Brand | SUPERMICRO |
|---|---|
| Series | CSE-829UAC-R1K02-T |
| Model | SYS-6028U-TR4T+ |
| Rack Height | 1U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 16-Core Processor |
| # of Processors Installed | E5-2683 V4 |
| Installed Memory Size | 256GB |
| Storage Controller | LSI MegaRAID 9361-8i Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | No |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | SuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports |
| Management Port | RJ 45 |
| Features | 12 x 3.5" SATA/SAS Hot-Plug Drive Bays |
この商品に関する質問
What RAID levels does the MegaRAID 9361-8i controller support on this server?
The MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50 and 60 across its eight SAS 12Gb/s ports with 1GB cache and battery backup.
What rack-mount hardware is required to install this 2U chassis?
The server uses a standard 2U rack footprint but ships without front bezel or rack-mount rails; you must supply compatible sliding rails for your cabinet.
How is the IPMI 2.0 management interface connected and accessed?
A dedicated RJ45 IPMI LAN port provides IPMI 2.0 with virtual media and KVM-over-LAN; plug it into your management network and configure the IP address via BIOS or DHCP.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Higole 11.6" Touch All-in-One PC Celeron N5095 8GB 128GB
- 11.6"
- 1366 x 768
Toemaagic All-in-One PC 24" FHD i7 4.0GHz 16GB 512GB White
- Toemaagic
- 16 GB
Lenovo A100 23.8" FHD All-in-One PC Intel N100 32GB DDR4 2TB SSD 1TB Dock Windows 11 Pro White
- All-in-One PC
- All-in-One



