暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rackmount duplicator with six drive slots and LCD display

Systor

Systor SYS306RMHDD-DP 1-to-6 SATA Duplicator & Sanitizer

SKU CH-MM76-9K1EM

Standalone rackmount duplicator copies up to six SATA drives at 300 MB/s and erases them to DoD 5220.22-M standard

  • TypeHDD Duplicator
  • Target1 to 6
  • Buffer Memory128M
  • Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
  • Data Transfer Rate300MB/s
  • Language SupportEnglish or Japanese

DATA TRANSFER RATE Rackmount - 18.0GB/min [300MB/sec]

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

TARGET SIZE 1 to 06

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation — no computer or software needed
  • Copies up to six drives at once at 300 MB/s
  • Secure erase compliant with DoD 5220.22-M
  • Supports FAT16, FAT32, NTFS, EXT2, EXT3, EXT4
  • Accepts 2.5" and 3.5" drives without adapters

Standalone 1-to-6 SATA Duplicator

This rackmount unit duplicates and sanitises up to six SATA hard drives or solid-state drives at once without a host computer. It accepts both 3.5 and 2.5 inch drives natively, copying sector-by-sector or file-system-aware across FAT16, FAT32, NTFS and Linux EXT2/3/4 volumes at up to 300 MB per second. An LCD panel and simple controls let you start jobs with a single button press.

Check drive fit and file-system needs

Verify that every source and target drive uses a standard SATA connector and fits a 3.5 or 2.5 inch form factor. The duplicator reads FAT16, FAT32, NTFS and EXT2/3/4 for quick-copy mode; other file systems require whole-media copy. Ensure the operating environment stays within 15 to 90 percent relative humidity for reliable operation.

Sustained 300 MB/s throughput with active cooling

Each bay includes a dedicated rear outtake fan alongside the main 40 mm rear fans, keeping temperatures stable during long multi-drive sessions. The 128 MB buffer absorbs burst variance so the 300 MB per second rate (18 GB per minute) holds across all six targets simultaneously. DoD 5220.22-M multi-pass erase runs complete without thermal throttling.

特長

  • Standalone operation — no computer or software needed
  • Copies up to six drives at once at 300 MB/s
  • Secure erase compliant with DoD 5220.22-M
  • Supports FAT16, FAT32, NTFS, EXT2, EXT3, EXT4
  • Accepts 2.5" and 3.5" drives without adapters

仕様

BrandSystor
ModelSYS306RMHDD-DP
TypeHDD Duplicator
Target1 to 6
Buffer Memory128M
Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
Data Transfer Rate300MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator ship with drives or caddies, or must I supply my own SATA drives?

The unit is a standalone duplicator and sanitizer that accepts 2.5 and 3.5 SATA drives directly without adapters; drives and any caddies are not included.

Should I choose the 1-to-6 model or a smaller target count for my workload?

The SYS306RMHDD-DP copies one source to up to six targets simultaneously, so select it when you need to duplicate to six drives in a single run.

What does the 300 MB/s transfer rate mean when the duplicator is running in my rack?

Each of the six target ports can sustain up to 300 MB/s, delivering up to 18 GB per minute per drive during copy or sanitization operations.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。