暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rackmount duplicator with six drive slots and LCD screen

Systor

Systor SYS106RMHDD-DP 1-to-6 SATA Duplicator & Sanitizer

SKU CH-R4WY-2QGD5

Rackmount duplicator copies up to six SATA drives at 90 MB/s and sanitises to DoD 5220.22-M standard

  • TypeHDD Duplicator
  • Target1 to 6
  • Buffer Memory128M
  • Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
  • Data Transfer Rate90MB/s
  • Language SupportEnglish or Japanese

DATA TRANSFER RATE Rackmount - 5.4GB/min [90MB/sec]

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

TARGET SIZE 1 to 06

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation — no PC or software required
  • Copies up to six drives simultaneously at 90MB/s
  • Supports FAT16, FAT32, NTFS and Linux EXT file systems
  • Erases drives to DoD 5220.22-M sanitisation standard
  • Accepts 2.5" and 3.5" drives without adapters

Standalone SATA duplicator for bulk cloning

The Systor SYS106RMHDD-DP copies one source drive to up to six targets simultaneously without a host computer. It supports 2.5 and 3.5 inch SATA hard drives and solid-state drives directly in its slot-loading bays. The unit handles FAT16, FAT32, NTFS and Linux EXT2 through EXT4 file systems in quick-copy mode and can duplicate entire media sector-by-sector for any format. An LCD screen and English or Japanese menus guide the operator through each task.

Sustained 90 MB/s throughput across all ports

Each of the six target ports maintains up to 90 MB per second during extended copy jobs, backed by 128 MB of buffer memory per channel. Rear 40 mm fans and individual port exhaust fans keep temperatures stable during long sessions, while the integrated power supply is rated for continuous operation. The standalone architecture eliminates host-bus contention, so performance does not degrade as more targets are added.

SATA interface limits drive count and speed

The duplicator provides six SATA target ports plus one source port, so a single run cannot exceed six clones. Transfer rate tops out at the SATA bus ceiling of 90 MB/s, making it unsuitable for workflows that demand higher throughput or more than six simultaneous targets. Drives larger than the addressing limits of the supported file systems may require whole-media mode, which copies every sector regardless of capacity.

特長

  • Standalone operation — no PC or software required
  • Copies up to six drives simultaneously at 90MB/s
  • Supports FAT16, FAT32, NTFS and Linux EXT file systems
  • Erases drives to DoD 5220.22-M sanitisation standard
  • Accepts 2.5" and 3.5" drives without adapters

仕様

BrandSystor
ModelSYS106RMHDD-DP
TypeHDD Duplicator
Target1 to 6
Buffer Memory128M
Supported MediaFAT16/32, NTFS, Linux(EXT2/EXT3/EXT4)
Data Transfer Rate90MB/s
Language SupportEnglish or Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
Load TypeSlot
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Environmental SpecOperating Humidity: 15% ~ 90%

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How loud does the Systor SYS106RMHDD-DP get when all six bays run continuously?

The unit uses 40mm rear fans plus a dedicated outtake fan per bay, so airflow stays steady even during long duplication jobs.

What drives or adapters must I already have to use this duplicator?

It accepts both 3.5" and 2.5" SATA drives directly with no adapter required.

Will the duplicator work with older SATA drives I still keep in storage?

Yes, it copies sector-by-sector regardless of brand, OS or format, supporting FAT16/32, NTFS and Linux EXT2/3/4.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。