暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of blue 3D printing filament, 2.85 mm diameter

Taulman 3D

Taulman 3D N-vent Filament 2.85mm 1lb Blue 3d printers accessory

SKU CH-P810-EWBBD

Low-odour, styrene-free filament in 2.85 mm diameter prints at 250–255 °C and yields clear, glossy, durable parts

  • ColorBlue
  • TypeFilament
  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing simplifies the printing workflow
  • Retains mechanical properties in finished 3D parts
  • Prints at 250–255 °C using 2.85 mm filament

Taulman 3D N-vent Filament 2.85mm Blue

This spool provides 1lb of blue filament made from Eastman Amphora 3D polymer. The material is low-odour and styrene-free, offering clarity, gloss and ease of processing. It retains its properties in finished 3D prints for functional and durable parts.

Suited for printers accepting 2.85 mm filament

Users with printers that take 2.85 mm material and can reach 250 to 255 °C will find this filament a good match. It is not for printers that require a different diameter or cannot operate at the stated nozzle temperature range.

2.85 mm diameter and 250 to 255 °C print temperature

The critical specification is the 2.85 mm filament size combined with the required nozzle temperature of 250 to 255 °C. Verify that your printer supports both before purchasing.

特長

  • Low-odor, styrene-free printing for a safer workspace
  • Clear, glossy finish enhances part appearance
  • Easy processing simplifies the printing workflow
  • Retains mechanical properties in finished 3D parts
  • Prints at 250–255 °C using 2.85 mm filament

仕様

Brandtaulman3d
ColorBlue
TypeFilament

この商品に関する質問

How do I install the 2.85 mm filament and what step is often missed?

Load the filament into a printer set between 250 and 255 °C; the step many miss is confirming the nozzle reaches full temperature before the first extrusion.

What maintenance or replacement will this filament need later?

The spool is consumed during printing; simply replace it with a new 1 lb roll when the material runs out.

What limit appears first during a long print with this material?

The 1 lb spool length is the first constraint; extended prints may require a fresh spool before the job finishes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。