Team Group CX2 2.5" 256GB SATA Internal SSD T253X6256G0C101
- Internal Solid Stat…
- Consumer
Team Group
A 2.5" SATA III internal SSD with 1TB capacity, 3D NAND, up to 540 MBps read and 490 MBps write speeds, 200 TBW endurance and shock-resistant design
The Team Group CX2 1 TB 2.5-inch drive uses 3D NAND and a SATA III interface to replace a mechanical hard drive in a laptop or desktop. It delivers sequential reads up to 540 MBps and writes up to 490 MBps with SLC caching and no DRAM cache. The 200 TBW rating and 1 000 000 hour MTBF suit everyday consumer workloads.
The drive runs on SATA Rev. 3.0 at 6 Gb/s and falls back to SATA Rev. 2.0 when the host only supports the older standard. Throughput cannot exceed the bus ceiling, so sustained transfers stay below the quoted 540 MBps read and 490 MBps write figures. Operating temperature is rated 0 °C to 70 °C and storage temperature -40 °C to 85 °C.
Mount the drive in any standard 2.5-inch bay, connect the SATA data and power cables, and the system recognises it without extra drivers. Common issues are loose cables, a port limited to SATA 2.0 speeds, or forgetting to initialise the volume in the operating system. Shock resistance of 1500 G and vibration resistance of 20 G protect the drive once installed.
| Brand | Team Group |
|---|---|
| Series | CX2 |
| Model | T253X6001T0C101 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 540 MBps |
| Max Sequential Write | Up to 490 MBps |
| Terabytes Written (TBW) | 200TB |
| MTBF | 1,000,000 hours |
| Features | A must-have for beginners who want to replace their traditional mechanical hard drive Advanced SLC Caching technology Shock and drop resistant for safe use ECC (Error Correction Code) function enhances efficiency |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 20G (non-operating) |
| Height | 7.00mm |
| Width | 69.90mm |
| Depth | 100.00mm |
| 配送重量 | 0.07 kg |
| 梱包サイズ | 124 × 91 × 5 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The 1TB model gives you 1TB of storage with 200TBW endurance. The 256GB and 512GB drives have lower capacity and the same 200TBW or 400TBW rating, while the 2TB version doubles capacity and raises endurance to 1600TBW. Pick the size that matches the space you need and the write workload you expect.
In a real machine the drive will deliver up to 540 MBps on large, sequential files when the SATA III link runs at 6Gbps. Everyday mixed workloads and small files will be slower, but you will still see boot and app-load times roughly four times quicker than a mechanical hard drive.
SATA III (SATA Rev. 3.0) limits the interface to 6Gbps, so the maximum throughput you can see is about 540 MBps read and 490 MBps write. The drive is backwards compatible with SATA Rev. 2.0, but on a 3Gbps port speeds will be roughly half.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?