暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular M.2 2280 SSD with integrated graphene heatsink, matte dark finish, 3.9mm thick

Team Group

Team Group T-Force GA PRO 4TB M.2 2280 PCIe 5.0 x4 internal SSD TM8FFJ004T0C129

SKU CH-1XGK-79J8C MPN TM8FFJ004T0C129

A 4TB M.2 2280 internal SSD with PCIe 5.0 x4 interface, up to 10000 MBps read and 8500 MBps write, DRAM cache, and graphene heatsink

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity4TB
  • Memory Components3D NAND
  • InterfacePCI-Express 5.0 x4

Options 4TB

  • Up to 10000 MB/s sequential read for rapid game loading
  • Up to 8500 MB/s sequential write for fast large-file transfers
  • 2400 TBW endurance rating for long-term heavy workloads
  • Patented graphene heatsink maintains performance under sustained use
  • 1,600,000-hour MTBF indicates high reliability for critical data

Built for PCIe 5.0 x4 systems

This 4TB M.2 2280 internal SSD uses the PCIe 5.0 x4 interface and NVMe protocol to reach 10000 MBps sequential read and 8500 MBps sequential write. A graphene heatsink and the InnoGrit IG5666 controller manage thermals and power states. It is made for consumer workloads that need sustained throughput.

Suits high-throughput builds; not for legacy slots

The drive fits M.2 2280 slots wired for PCIe 5.0 x4 and operates from 0°C to 70°C. It offers 2400TB TBW and 1600000 hours MTBF for heavy write cycles. Systems limited to PCIe 3.0 or 4.0 will not use the full bandwidth, so buyers on older platforms should consider a matching-generation drive.

Deciding spec: 10000 MBps sequential read

That peak read speed only appears when the motherboard provides a PCIe 5.0 x4 link and NVMe 2.0 support. If the platform tops out at PCIe 4.0, the drive will still work but cannot hit the rated figure. Check the slot specification before purchase.

特長

  • Up to 10000 MB/s sequential read for rapid game loading
  • Up to 8500 MB/s sequential write for fast large-file transfers
  • 2400 TBW endurance rating for long-term heavy workloads
  • Patented graphene heatsink maintains performance under sustained use
  • 1,600,000-hour MTBF indicates high reliability for critical data

仕様

BrandTeam Group
SeriesT-Force GA PRO
ModelTM8FFJ004T0C129
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity4TB
Memory Components3D NAND
InterfacePCI-Express 5.0 x4
ProtocolNVMe
Max Sequential ReadUp to 10000 MBps
Max Sequential WriteUp to 8500 MBps
Terabytes Written (TBW)2400TB
MTBF1,600,000 hours
HeatSinkwith HeatSink
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1,500G/0.5ms
Max Vibration Resistance80Hz~2,000Hz/20G
Height3.9mm
Width22mm
Depth80mm
Weight7g
配送重量0.05 kg
梱包サイズ124 × 95 × 13 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What M.2 slot key and length does the 2280 form factor require?

The drive uses the M.2 2280 form factor, so it needs an M-key slot that accepts 80 mm long modules.

How do I install the TM8FFJ004T0C129, and which step is most often missed?

Insert the M.2 module into the motherboard M-key slot, then fasten the single retention screw; the step most often missed is securing that screw after seating the drive.

When will the 4 TB drive with 2400 TBW endurance need replacement?

The drive is rated for 2400 TBW and 1,600,000 hours MTBF; replace it once the SMART health indicator reports the endurance reserve is exhausted.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。