Thermaltake Toughpower GF3 850W power supply PS-TPD-0850FNFAGU-4
- ATX 12V v3.1
- 850 W
Thermaltake
Delivers 1000W via ATX 3.1 with native 12V-2x6 GPU connectors, full modular flat cables and a 135mm hydraulic-bearing fan
Options 1000W
The Thermaltake Toughpower GF3 delivers 1000W continuous output at 80 Plus Gold efficiency. Built to the ATX 12V v3.1 standard, it handles high transient loads for modern graphics cards. It is suited for builders assembling high-performance desktops that demand stable power delivery. The single +12V rail design simplifies power distribution across all components.
A full modular layout lets you connect only the cables required, reducing clutter inside the case. Flat cables with colour-matched connectors improve routing flexibility and visual consistency. Twelve SATA power connectors support multiple storage drives and peripherals. The 24-pin ATX main connector and two native 12V-2x6 PCIe cables attach directly without adapters. A 135mm hydraulic bearing fan provides cooling under load.
Two native PCIe 5.1 12V-2x6 connectors each deliver up to 600W to compatible graphics cards. This connector specification is the single detail that determines whether the unit matches your GPU power requirements. Japanese 105°C main capacitors and sub-30mV ripple noise contribute to long-term reliability. Smart Zero Fan mode stops the fan at low loads for quieter operation.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-1000FNFAGU-4 |
| Type | ATX 12V v3.1 |
| Maximum Power | 1000 W |
| Fans | 1 x 135 mm Hydraulic Bearing Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12V-2x6 |
| SATA Power Connector | 12 |
| Haswell Support | Yes |
| Max PSU Length | 150 mm |
| Modular | Full Modular |
| Efficiency | > 90% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| PSU Noise Level | Cybenetics Standard + |
| Over Voltage Protection | Yes |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 24 pin ATX / 12 x SATA |
| Features | 1000W continuous output at 80Plus Gold efficiency Compatible with Intel ATX 3.1 spceification, providing sufficient and stable power delivery PCIe Gen.5.1 12VHPWR Connectors included 100% high quality Japanese 105°C/221°F capacitor <30mV low ripple noise design & strict voltage regulation <±2% Fully modular with low-profile flat White cables Smart Zero Fan: auto-regulated fan speed based on power consumption for a quiet and efficient operation Ultra quiet 135mm hydraulic bearing fan High amperage single +12V rail design |
| Dimensions | 5.9" x 3.4" x 6.3" |
| Weight | 3.79 lbs. |
| 配送重量 | 3.31 kg |
| 梱包サイズ | 320 × 231 × 157 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Yes, the unit includes two native PCIe 5.1 12V-2x6 cables rated for up to 600W, matching the ATX 3.1 excursion spec for high-end graphics cards.
At 150mm long it matches the typical ATX envelope, so it fits most mid-tower cases; check your case clearance if drive cages sit close to the PSU shroud.
The full-modular set uses low-profile flat white cables with colour-matched connectors, making routing easier and keeping a white aesthetic consistent.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?