Thermaltake Toughpower GF3 850W power supply PS-TPD-0850FNFAGU-4
- ATX 12V v3.1
- 850 W
Thermaltake
Delivers 1000W via ATX 3.1 with native 12V-2x6 GPU connectors, full modular flat cables and a 135mm hydraulic-bearing fan
Options 1000W
The Thermaltake Toughpower GF3 delivers 1000W continuous output at 80 Plus Gold efficiency. Built to the ATX 12V v3.1 standard, it handles high transient loads for modern graphics cards. It is suited for builders assembling high-performance desktops that demand stable power delivery. The single +12V rail design simplifies power distribution across all components.
A full modular layout lets you connect only the cables required, reducing clutter inside the case. Flat cables with colour-matched connectors improve routing flexibility and visual consistency. Twelve SATA power connectors support multiple storage drives and peripherals. The 24-pin ATX main connector and two native 12V-2x6 PCIe cables attach directly without adapters. A 135mm hydraulic bearing fan provides cooling under load.
Two native PCIe 5.1 12V-2x6 connectors each deliver up to 600W to compatible graphics cards. This connector specification is the single detail that determines whether the unit matches your GPU power requirements. Japanese 105°C main capacitors and sub-30mV ripple noise contribute to long-term reliability. Smart Zero Fan mode stops the fan at low loads for quieter operation.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-1000FNFAGU-4 |
| Type | ATX 12V v3.1 |
| Maximum Power | 1000 W |
| Fans | 1 x 135 mm Hydraulic Bearing Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12V-2x6 |
| SATA Power Connector | 12 |
| Haswell Support | Yes |
| Max PSU Length | 150 mm |
| Modular | Full Modular |
| Efficiency | > 90% |
| Energy-Efficient | 80 PLUS GOLD Certified |
| PSU Noise Level | Cybenetics Standard + |
| Over Voltage Protection | Yes |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 24 pin ATX / 12 x SATA |
| Features | 1000W continuous output at 80Plus Gold efficiency Compatible with Intel ATX 3.1 spceification, providing sufficient and stable power delivery PCIe Gen.5.1 12VHPWR Connectors included 100% high quality Japanese 105°C/221°F capacitor <30mV low ripple noise design & strict voltage regulation <±2% Fully modular with low-profile flat White cables Smart Zero Fan: auto-regulated fan speed based on power consumption for a quiet and efficient operation Ultra quiet 135mm hydraulic bearing fan High amperage single +12V rail design |
| Dimensions | 5.9" x 3.4" x 6.3" |
| Weight | 3.79 lbs. |
| 배송 무게 | 3.31 kg |
| 포장 크기 | 320 × 231 × 157 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
Yes, the unit includes two native PCIe 5.1 12V-2x6 cables rated for up to 600W, matching the ATX 3.1 excursion spec for high-end graphics cards.
At 150mm long it matches the typical ATX envelope, so it fits most mid-tower cases; check your case clearance if drive cages sit close to the PSU shroud.
The full-modular set uses low-profile flat white cables with colour-matched connectors, making routing easier and keeping a white aesthetic consistent.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?