Thermaltake Toughpower GF3 1000W power supply PS-TPD-1000FNFAGU-4
- ATX 12V v3.1
- 1000 W
Thermaltake
An 850 W ATX 3.1 power supply with native 12V-2x6 GPU connectors, full modular flat cables, 140 mm zero-fan cooling and 80 Plus Gold efficiency
Options 850W
This fully modular unit delivers 850 W of continuous power and meets the ATX 3.1 design standard. Japanese main capacitors and a single +12 V rail provide stable output for modern desktop builds. The 140 mm hydraulic bearing fan uses a Smart Zero mode to stay off at low loads. Eighty Plus Gold certification confirms high efficiency across typical workloads.
Under continuous demand the power supply maintains its rated output while the fan ramps gradually to meet thermal needs. Cybenetics A- noise certification indicates quiet operation even when the system draws heavy current for extended periods. Full protection circuits including OCP, OVP, UVP, OPP, SCP and OTP guard components during prolonged stress. The 150 mm chassis depth fits standard ATX cases without restricting airflow.
Two native 12V-2x6 cables each support up to 600 W, enabling direct connection to current-generation graphics cards without adapters. The matcha-coloured H++ connector reveals a visible colour cue only when the plug is not fully seated. Flat modular cables with colour-matched ends simplify routing and improve case aesthetics. This connector specification is the decisive factor for GPU compatibility.
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GF3 Series |
| Model | PS-TPD-0850FNFAGU-4 |
| Type | ATX 12V v3.1 |
| Maximum Power | 850 W |
| Fans | 1 x 140 mm Hydraulic Bearing Smart Zero Fan |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 12V-2x6 |
| Haswell Support | Yes |
| Max PSU Length | 150 mm |
| Modular | Full Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
| PSU Noise Level | Cybenetics A- |
| Protection | OCP/OVP/UVP/OPP/SCP/OTP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50Hz - 60Hz |
| Input Current | 10 - 5A |
| Output | +3.3V@22A, +5V@22A, [email protected] , [email protected] , +5VSB@3A |
| MTBF | 100,000 Hours Minimum |
| Approvals | CE/UKCA/cTUVus/TÜV/FCC/IC/BSMI/EAC/CB/BIS/KCC |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin ATX / 1 x Floppy / 12 x SATA / 2 x 8 pin (4+4) EPS (CPU) / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe |
| Features | 850W continuous output at 80Plus Gold efficiency Compatible with Intel ATX 3.1 spceification, providing sufficient and stable power delivery PCIe Gen.5.1 12VHPWR Connectors included 100% high quality Japanese 105°C/221°F capacitor <30mV low ripple noise design & strict voltage regulation <±2% Fully modular with low-profile flat White cables Smart Zero Fan: auto-regulated fan speed based on power consumption for a quiet and efficient operation Ultra quiet 135mm hydraulic bearing fan High amperage single +12V rail design |
| Dimensions | 5.9" x 3.4" x 6.3" |
| 배송 무게 | 3.45 kg |
| 포장 크기 | 312 × 236 × 157 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The unit carries a Cybenetics A- noise rating and the Smart Zero Fan mode keeps the 140 mm hydraulic-bearing fan idle until load demands cooling, so all-day running stays very quiet.
You need a 24-pin ATX socket, two 8-pin EPS (4+4) CPU headers, and the new 12V-2x6 (12+4) PCIe 5.1 connector; all cables detach so you only plug what the board and card require.
Yes — Haswell support is confirmed, the single +12 V rail delivers the full 850 W to legacy components, and the 150 mm length fits most traditional ATX chassis.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?