暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Timetec

Timetec 8GB DDR4 2666MHz CL19 UDIMM desktop RAM

SKU CH-S1ZN-FSH5X

An 8 GB DDR4 desktop module running at 2666 MHz with CL19 latency and 1.2 V operation

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ColorBlack PCB
  • 8GB capacity supports smoother multitasking on DDR4 desktops
  • 2666MHz speed with CL19 latency delivers responsive performance
  • 2V operation reduces power draw versus DDR3 modules
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Non-ECC unbuffered design suits consumer PC and workstation builds

8GB DDR4 2666MHz UDIMM for desktop upgrades

This single 8 GB module runs at 2666 MHz with CL19 latency and 1.20 V operation. It fits standard 288-pin DDR4 UDIMM slots on compatible desktops and workstations. The non-ECC unbuffered design suits mainstream consumer platforms.

Thermals noise and power draw

Operating at 1.20 V keeps power consumption low compared with older DDR3 modules. The low voltage also reduces heat output, helping system fans run quieter during typical workloads. No active cooling is required for normal operation.

2666MHz CL19 speed rating

The module is rated for 2666 MHz at CL19, matching the PC4-21300 specification. Systems that support 2666 MHz will run at that speed; boards limited to 2133 MHz or 2400 MHz will downclock automatically. It is not compatible with laptop SODIMM slots.

特長

  • 8GB capacity supports smoother multitasking on DDR4 desktops
  • 2666MHz speed with CL19 latency delivers responsive performance
  • 2V operation reduces power draw versus DDR3 modules
  • 288-pin UDIMM form factor fits standard desktop DIMM slots
  • Non-ECC unbuffered design suits consumer PC and workstation builds

仕様

BrandTimetec
ModelMR-G8GD426U2E
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ColorBlack PCB

この商品に関する質問

How do I install the 288-pin UDIMM and what step do people often miss?

Align the notch with the slot key, press firmly until the retention clips click, and verify the motherboard recognises the full 8GB at 2666MHz in BIOS.

What maintenance or replacement will the 1.2V DDR4 module need later?

No scheduled maintenance is required; replace only if memory errors appear or a capacity upgrade is desired.

What limit appears first under sustained load with CL19 timing?

The CAS latency of 19 cycles at 2666MHz sets the response-time floor during continuous memory-intensive work.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。