OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Total Micro Technologies
ECC DDR4 DIMM module rated at 2400 MHz with CL17 latency and 1.20 V operation
This 8GB DDR4-2400 module adds ECC-protected memory to compatible HPE ProLiant Gen9 Entry servers. The unbuffered DIMM runs at 1.20V with CL17 latency and includes an Intel XMP 2.0 profile for straightforward configuration. It suits administrators who need single-module capacity expansion without registered buffering.
The stick uses the industry-standard 288-pin DDR4 form factor and measures 7.8 inches long by 3.5 inches wide with a 750 mil thickness. It requires a motherboard that accepts unbuffered ECC DDR4 memory and an available DIMM slot. The single-rank design leaves additional slots free for future upgrades.
At 1.20V the module draws minimal power during typical server workloads, keeping thermal output low inside dense chassis. Unbuffered signal processing reduces electrical load on the memory controller. The green PCB and standard-height heat spreader allow unrestricted airflow from existing system fans.
| Brand | Total Micro |
|---|---|
| Part Number | 862974B21TM |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | ECC |
| BIOS/Performance Profile | Intel XMP 2.0 |
| 配送重量 | 0.45 kg |
| 梱包サイズ | 226 × 143 × 55 mm |
The module runs at CL17, so each access cycle waits 17 clock ticks before data is returned.
At 1.20 V the stick draws minimal power and stays cool enough for passive airflow in a server chassis.
A standard DDR4 288-pin DIMM slot with unbuffered ECC support is required.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?