暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular M.2 2280 circuit board with gold edge connector and black label

Transcend

Transcend 830S 128 GB M.2 2280 SATA internal SSD

SKU CH-GD9W-BM5BJ

M.2 2280 SATA drive with 128 GB of 3D NAND, up to 560 MBps read and 380 MBps write speeds

  • Device TypeInternal
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity128GB
  • Memory Components3D NAND
  • InterfaceSATA III
  • 128 GB capacity for essential files and OS
  • SATA III interface delivers up to 560 MB/s read speed
  • 3D NAND memory provides reliable storage performance
  • DRAM cache boosts responsiveness during everyday tasks
  • M.2 2280 form factor fits slim laptops and desktops

Transcend 830S 128 GB M.2 2280 SATA SSD

This internal solid-state drive uses 3D NAND and a Transcend controller to deliver up to 560 MBps sequential read and 380 MBps sequential write over a SATA III interface. It fits the M.2 2280 slot and measures 3.1" deep, .9" wide and .1" high.

Suits SATA-only laptops

The SATA protocol limits throughput to the 600 MBps ceiling, so workloads that demand PCIe bandwidth will not benefit. Builders who require higher capacities or faster sequential speeds should select a larger or PCIe-based model instead.

Drops into any M.2 2280 key-M

No PCIe lanes are consumed, leaving them free for a graphics card or additional storage. The 128 unknown_modifier cache and DRAM-less design keep power draw low, while the 560 MBps read ceiling matches the SATA III link speed.

特長

  • 128 GB capacity for essential files and OS
  • SATA III interface delivers up to 560 MB/s read speed
  • 3D NAND memory provides reliable storage performance
  • DRAM cache boosts responsiveness during everyday tasks
  • M.2 2280 form factor fits slim laptops and desktops

仕様

BrandTranscend
Series830S
ModelTS128GMTS830S
Part NumberTS128GMTS830S
Device TypeInternal
Used ForConsumer
Form FactorM.2 2280
Capacity128GB
Memory Components3D NAND
InterfaceSATA III
ProtocolSATA
ConnectorSATA
ControllerTranscend
Cache128 unknown_modifier
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 380 MBps
Features560 megabytes_per_second
Height0.1"
Width0.9"
Depth3.1"
Weight0.28 oz
Package ContentSSD

この商品に関する質問

Does my motherboard need an M.2 slot that supports SATA to use this 830S 128 GB drive?

Yes, the drive uses the M.2 2280 form factor with a SATA connector, so the slot must provide SATA signalling.

Will this SATA 830S work in the same M.2 socket where I previously used a SATA M.2 drive?

Yes, any M.2 2280 socket wired for SATA will accept this drive; it shares the same physical and electrical interface.

How can I confirm the 830S is delivering its rated 560 MBps read and 380 MBps write after installation?

Run a sequential benchmark tool such as CrystalDiskMark and compare the results to the 560 MBps read and 380 MBps write specifications.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。