저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green rectangular M.2 2280 circuit board with gold edge connector and black label

Transcend

Transcend 830S 128 GB M.2 2280 SATA internal SSD

SKU CH-GD9W-BM5BJ

M.2 2280 SATA drive with 128 GB of 3D NAND, up to 560 MBps read and 380 MBps write speeds

  • Device TypeInternal
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity128GB
  • Memory Components3D NAND
  • InterfaceSATA III
  • 128 GB capacity for essential files and OS
  • SATA III interface delivers up to 560 MB/s read speed
  • 3D NAND memory provides reliable storage performance
  • DRAM cache boosts responsiveness during everyday tasks
  • M.2 2280 form factor fits slim laptops and desktops

Transcend 830S 128 GB M.2 2280 SATA SSD

This internal solid-state drive uses 3D NAND and a Transcend controller to deliver up to 560 MBps sequential read and 380 MBps sequential write over a SATA III interface. It fits the M.2 2280 slot and measures 3.1" deep, .9" wide and .1" high.

Suits SATA-only laptops

The SATA protocol limits throughput to the 600 MBps ceiling, so workloads that demand PCIe bandwidth will not benefit. Builders who require higher capacities or faster sequential speeds should select a larger or PCIe-based model instead.

Drops into any M.2 2280 key-M

No PCIe lanes are consumed, leaving them free for a graphics card or additional storage. The 128 unknown_modifier cache and DRAM-less design keep power draw low, while the 560 MBps read ceiling matches the SATA III link speed.

주요 특징

  • 128 GB capacity for essential files and OS
  • SATA III interface delivers up to 560 MB/s read speed
  • 3D NAND memory provides reliable storage performance
  • DRAM cache boosts responsiveness during everyday tasks
  • M.2 2280 form factor fits slim laptops and desktops

사양

BrandTranscend
Series830S
ModelTS128GMTS830S
Part NumberTS128GMTS830S
Device TypeInternal
Used ForConsumer
Form FactorM.2 2280
Capacity128GB
Memory Components3D NAND
InterfaceSATA III
ProtocolSATA
ConnectorSATA
ControllerTranscend
Cache128 unknown_modifier
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 380 MBps
Features560 megabytes_per_second
Height0.1"
Width0.9"
Depth3.1"
Weight0.28 oz
Package ContentSSD

이 상품에 대한 질문

Does my motherboard need an M.2 slot that supports SATA to use this 830S 128 GB drive?

Yes, the drive uses the M.2 2280 form factor with a SATA connector, so the slot must provide SATA signalling.

Will this SATA 830S work in the same M.2 socket where I previously used a SATA M.2 drive?

Yes, any M.2 2280 socket wired for SATA will accept this drive; it shares the same physical and electrical interface.

How can I confirm the 830S is delivering its rated 560 MBps read and 380 MBps write after installation?

Run a sequential benchmark tool such as CrystalDiskMark and compare the results to the 560 MBps read and 380 MBps write specifications.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.