暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eaton 24V DC DIN rail UPS 240W hardwire terminals

Tripp Lite

Tripp Lite 24V DC DIN Rail UPS 240W Hardwire I/O

SKU CH-899E-RQFWV

24 V DC DIN-rail UPS delivers 240 W of hardwired battery backup for industrial equipment

  • 240 W output protects 24 V DC industrial loads
  • DIN-rail mount fits standard control cabinets
  • Hardwire terminals enable permanent field wiring
  • LED status shows power, battery and fault states
  • 24240 model rated for continuous 240 VA operation

Industrial DIN Rail UPS

The Eaton DIN24240DC is a 24 V DC uninterruptible power supply rated at 240 W for hard-wired industrial installations. It mounts on standard DIN rail and uses screw-terminal connections for both input and output circuits. Status LEDs indicate power, line mode, battery mode and fault conditions at a glance.

Suited for control panels needing DC backup

This unit fits automation cabinets that run 24 V DC loads and require battery ride-through during mains interruptions. It is not for AC-powered equipment, rack-mount server rooms or applications that need network management cards or extended runtime modules.

240 W at 24 V DC decides fit

The 240 W rating at 24 V DC is the single figure that determines whether the UPS can carry your connected load. Verify the total device draw against this number before specifying the unit.

特長

  • 240 W output protects 24 V DC industrial loads
  • DIN-rail mount fits standard control cabinets
  • Hardwire terminals enable permanent field wiring
  • LED status shows power, battery and fault states
  • 24240 model rated for continuous 240 VA operation

仕様

BrandEATON

この商品に関する質問

How much usable backup power does the 240 W rating deliver when the unit is installed in a 24 V DC control cabinet?

The 240 W rating is the maximum continuous output the UPS can supply to connected loads while running on battery power.

What does the hard-wire input and output interface limit in a typical industrial installation?

Hard-wire terminals require permanent wiring, so the UPS cannot be swapped quickly and the circuit must be de-energised before any connection changes.

What physical mounting does the DIN rail form factor require inside the enclosure?

The unit clips directly onto a standard DIN rail, so panel space for that rail and clearance for wiring terminals are the only mounting requirements.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。