Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eaton 24V DC DIN rail UPS 240W hardwire terminals

Tripp Lite

Tripp Lite 24V DC DIN Rail UPS 240W Hardwire I/O

SKU CH-899E-RQFWV

24 V DC DIN-rail UPS delivers 240 W of hardwired battery backup for industrial equipment

  • 240 W output protects 24 V DC industrial loads
  • DIN-rail mount fits standard control cabinets
  • Hardwire terminals enable permanent field wiring
  • LED status shows power, battery and fault states
  • 24240 model rated for continuous 240 VA operation

Industrial DIN Rail UPS

The Eaton DIN24240DC is a 24 V DC uninterruptible power supply rated at 240 W for hard-wired industrial installations. It mounts on standard DIN rail and uses screw-terminal connections for both input and output circuits. Status LEDs indicate power, line mode, battery mode and fault conditions at a glance.

Suited for control panels needing DC backup

This unit fits automation cabinets that run 24 V DC loads and require battery ride-through during mains interruptions. It is not for AC-powered equipment, rack-mount server rooms or applications that need network management cards or extended runtime modules.

240 W at 24 V DC decides fit

The 240 W rating at 24 V DC is the single figure that determines whether the UPS can carry your connected load. Verify the total device draw against this number before specifying the unit.

Pluspunten

  • 240 W output protects 24 V DC industrial loads
  • DIN-rail mount fits standard control cabinets
  • Hardwire terminals enable permanent field wiring
  • LED status shows power, battery and fault states
  • 24240 model rated for continuous 240 VA operation

Specificaties

BrandEATON

Vragen over dit artikel

How much usable backup power does the 240 W rating deliver when the unit is installed in a 24 V DC control cabinet?

The 240 W rating is the maximum continuous output the UPS can supply to connected loads while running on battery power.

What does the hard-wire input and output interface limit in a typical industrial installation?

Hard-wire terminals require permanent wiring, so the UPS cannot be swapped quickly and the circuit must be de-energised before any connection changes.

What physical mounting does the DIN rail form factor require inside the enclosure?

The unit clips directly onto a standard DIN rail, so panel space for that rail and clearance for wiring terminals are the only mounting requirements.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.