暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal crypto miner unit with integrated power supply, matte grey finish, front fan grille visible

TROUVER

TROUVER Antminer S19 86TH/S SHA-256 Mining Hardware

SKU CH-0T6M-9KDA4

SHA-256 miner delivering 86Th/s at 2942W with included power supply, requiring 220V input

  • 86Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 2942W power draw enables efficient energy cost planning
  • 220V input requirement ensures stable operation with correct supply
  • New firmware accelerates start-up and improves control stability
  • Mines Bitcoin, Peercoin, Curecoin and other SHA-256 coins

TROUVER Antminer S19 86TH/S SHA-256 Miner

This TROUVER Antminer S19 delivers a maximum hashrate of 86Th/s on the SHA-256 algorithm while drawing 2942W of power. It is built for operators who run dedicated mining infrastructure and can supply the required 220V input. The unit ships new with a power supply included.

Suited for 220V facilities mining Bitcoin

The hardware mines Bitcoin (BTC), Joulecoin (XJO), Peercoin (PPC), eMark (DEM), Acoin (ACOIN), Curecoin (CURE), Unbreakable (UNB), Crown (CRW), Terracoin (TRC) and others. It is not suitable for sites limited to lower mains voltages; incorrect input voltage will likely damage the miner. Operators without 220V service should consider other equipment.

Sustained load behaviour with updated firmware

The new firmware design enables faster start-up, more stable performance and a more efficient control mechanism during continuous operation. This stability improvement addresses issues seen in earlier S17 series units. The miner maintains its rated 86Th/s output under constant load when powered correctly at 220V.

特長

  • 86Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 2942W power draw enables efficient energy cost planning
  • 220V input requirement ensures stable operation with correct supply
  • New firmware accelerates start-up and improves control stability
  • Mines Bitcoin, Peercoin, Curecoin and other SHA-256 coins

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What input voltage must my facility provide for the Antminer S19 86Th to operate safely?

The unit requires a 220V supply. Applying the wrong voltage can damage the miner, so confirm your site delivers 220V before connecting the included power supply.

Will the Antminer S19 86Th share a 220V circuit with my older Antminer S9 units without tripping the breaker?

Each S19 86Th draws 2942W at the wall, far more than an S9. Plan dedicated 220V circuits for every S19; mixing them on the same breaker as older hardware will likely overload the circuit.

How can I verify the Antminer S19 86Th is hashing at the rated 86Th/s after power-up?

Log into the miner’s web dashboard or your pool’s worker page. A healthy unit will report a real-time hashrate near 86Th/s on the SHA-256 algorithm with stable temperature and fan readings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。