暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White rectangular wall-mounted access point with four Ethernet ports on the bottom edge

Ubiquiti Networks

Ubiquiti Networks U6-IW Wi-Fi 6 in-wall access point

SKU CH-015P-RMQTF MPN U6-IW

Wall-mounted Wi-Fi 6 access point with six spatial streams, four gigabit Ethernet ports and PoE power for single-room coverage up to 115 m²

  • # of Users300+
  • Standards802.11a/b/g/n/ac/ax (WiFi 6)
  • WiFi GenerationWi-Fi 6
  • Wireless Data Rates802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5,
  • SecurityWPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
  • Antenna2.4 GHz 2 x 2 (DL/UL MU-MIMO) 5 GHz 4 x 4 (DL/UL MU-MIMO)

Options U6 In-Wall

  • U6 Enterprise
  • U6 Enterprise In-Wall
  • U6 Pro
  • U6 Long-Range
  • U6+
  • U6 Mesh
  • U6 Mesh Pro
  • U6 In-Wall

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Wi-Fi 6 supports 300+ simultaneous users
  • 6 spatial streams deliver 4.8 Gbps peak throughput
  • Four GbE ports plus PoE output simplify room wiring
  • Indoor coverage reaches 115 m² from a wall mount
  • Operates from -30 to 60 °C in humid conditions

In-wall Wi-Fi 6 access point

The Ubiquiti U6-IW mounts inside a standard wall box to deliver Wi-Fi 6 coverage for a single room. It supports up to 300+ simultaneous users and provides indoor range up to 115m. The unit draws power through PoE or PoE+ and includes a four-port gigabit switch with one PoE output port.

Hospitality rooms and dense client environments

This model suits hotels, dormitories or offices where a clean in-wall installation and a built-in switch for wired devices are required. It is not intended for buyers who need outdoor-rated hardware, larger multi-room coverage from a single unit, or uplink speeds beyond gigabit ethernet.

PoE-powered with integrated four-port switch

The access point requires a PoE or PoE+ source on its single gigabit uplink port. When fed with PoE+, it can pass power to one downstream device through the switch. Four gigabit data-out ports free up cabling for desktops, phones or IoT gear in the same room.

特長

  • Wi-Fi 6 supports 300+ simultaneous users
  • 6 spatial streams deliver 4.8 Gbps peak throughput
  • Four GbE ports plus PoE output simplify room wiring
  • Indoor coverage reaches 115 m² from a wall mount
  • Operates from -30 to 60 °C in humid conditions

仕様

BrandUbiquiti Networks
SeriesWIFI Access points
ModelU6 In-Wall
Part NumberU6-IW
# of Users300+
Standards802.11a/b/g/n/ac/ax (WiFi 6)
WiFi GenerationWi-Fi 6
Wireless Data Rates802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40)
802.11ac 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
SecurityWPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
Antenna2.4 GHz 2 x 2 (DL/UL MU-MIMO)
5 GHz 4 x 4 (DL/UL MU-MIMO)
Transmitted Power2.4 GHz 22 dBm
5 GHz 26 dBm
Mounting LocationIndoor
Operating RangeIndoor: Up to 115m, Outdoor: Up to 115m
Interface(1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
LAN Ports(1) Data-in: GbE RJ45 port
(4) Data-out: GbE RJ45 ports
Power SupplyPoE
PoE+ (Required for PoE output)
Temperature-30 to 60° C (-22 to 140° F)
Humidity5 to 95% noncondensing
Dimensions139.7 x 96 x 31.2 mm (5.5 x 3.8 x 1.3")
Weight460 g (1 lb)
FeaturesBSSID 8 per radio
VLAN 802.1Q
Advanced QoS Per-user rate limiting
Guest traffic isolation Supported
Concurrent clients 300+
Zero-wait DFS Yes*
*Supported with upcoming firmware versions.
配送重量4.54 kg
梱包サイズ254 × 254 × 254 mm

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Do I need a PoE+ switch or injector to power the U6-IW and use its PoE output port?

The access point requires PoE+ to activate its single PoE output on one of the four GbE data-out ports; standard PoE powers the unit but disables that output.

Will the 2.4 GHz 2x2 and 5 GHz 4x4 MU-MIMO radios work with my existing 802.11n and 802.11ac devices?

The radios support 802.11a/b/g/n/ac/ax standards, so older 802.11n and 802.11ac clients connect at their rated MCS speeds.

How can I verify the U6-IW is delivering Wi-Fi 6 throughput after installation?

Connect a Wi-Fi 6 client and confirm a PHY rate up to 4.8 Gbps on the 5 GHz 4x4 radio; the UniFi controller also shows per-client MCS index and spatial streams.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。