暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Five stainless steel MK8 nozzles with M6 threads and stamped size markings

Unique-Bargains

Unique-Bargains 0.6mm MK8 Stainless Steel Nozzle 5pcs 1.75mm Filament

SKU CH-A3QA-W4CNW

A set of five stainless-steel MK8 nozzles with a 0.6 mm bore for 1.75 mm filament, each stamped for quick identification

  • 6 mm nozzle diameter speeds larger-layer prints
  • Stainless steel resists wear from abrasive filaments
  • M6 thread with 5 mm length fits MK8 hotends
  • Stamped size markings simplify nozzle identification
  • Pack of five nozzles covers replacements and spares

MK8 Stainless Steel Nozzle 5-Pack

This pack contains five 0.6 mm stainless steel nozzles built for MK8 hot-ends that accept 1.75 mm filament. Each nozzle carries an M6 thread with a 5 mm thread length and an overall size of 13 x 6 mm. The stainless construction resists wear from abrasive filaments better than standard brass tips.

Suited For Abrasive Filament Users

Makers printing carbon-fibre, wood-filled or glow-in-the-dark materials gain longer nozzle life from the hardened steel tip. Users who only print standard PLA, ABS or PETG and prefer faster heat transfer may find brass nozzles more economical for their workflow.

Critical Spec: 0.6 mm Orifice Diameter

The 0.6 mm opening sets the extrusion width and layer-height range for every print. A smaller diameter would limit flow for high-speed or large-layer jobs, while a larger one would reduce detail on fine features. Match this figure to your slicer profile before installing.

特長

  • 6 mm nozzle diameter speeds larger-layer prints
  • Stainless steel resists wear from abrasive filaments
  • M6 thread with 5 mm length fits MK8 hotends
  • Stamped size markings simplify nozzle identification
  • Pack of five nozzles covers replacements and spares

仕様

BrandUnique Bargains

この商品に関する質問

Should I pick the 0.6 mm stainless steel MK8 nozzles over a different diameter for my 1.75 mm filament printer?

The 0.6 mm bore extrudes wider lines than smaller nozzles, letting you print faster with thicker layers while still accepting standard 1.75 mm filament on MK8 hot-ends.

What does the 0.6 mm nozzle diameter mean for everyday printing on my MK8 machine?

A 0.6 mm opening lays down broader tracks, so you can use larger layer heights and finish parts quicker, though very small details below that width will not resolve.

Does the M6 thread with 5 mm length fit every MK8 hot-end, or are there limits?

The nozzles use an M6 thread 5 mm long, which matches the standard MK8 specification; always hold the heat block with a spanner while tightening to avoid damage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。