暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A single loose coil of black 1.75mm PLA filament on a clear spool

Unique-Bargains

Unique-Bargains PLA 3D Printer Filament 1.75mm 10m Black 32g

SKU CH-0J7Y-JG0PX

A 10-metre spool of 1.75 mm PLA filament weighing 32 g, held to ±0.02 mm accuracy for consistent, warp-free prints

  • TypeTubes
  • High-purity PLA for stable, high-quality prints
  • Bubble-free extrusion gives smooth, bright finishes
  • ±0.02 mm diameter accuracy fits any 1.75 mm printer
  • Low shrinkage and strong toughness prevent warping and breakage
  • Renewable, plant-based material free from hazardous substances

Universal 1.75 mm PLA filament

This 10-metre spool of black PLA filament is designed for any desktop 3D printer that accepts 1.75 mm material. The 32 g coil suits hobbyists, educators and makers who need a small quantity for test prints or short-run projects.

Consistent extrusion on long prints

Dimensional accuracy of ±0.02 mm keeps the filament diameter steady throughout extended printing sessions. Low shrinkage and good fluidity reduce warping and nozzle plugging when the hot-end runs for hours.

Diameter tolerance decides fit

A ±0.02 mm tolerance determines whether the filament feeds reliably in a Bowden or direct-drive extruder calibrated for 1.75 mm stock. Printers requiring tighter or looser specs will not work correctly with this coil.

特長

  • High-purity PLA for stable, high-quality prints
  • Bubble-free extrusion gives smooth, bright finishes
  • ±0.02 mm diameter accuracy fits any 1.75 mm printer
  • Low shrinkage and strong toughness prevent warping and breakage
  • Renewable, plant-based material free from hazardous substances

仕様

BrandUnique Bargains
TypeTubes

この商品に関する質問

Does PLA filament produce noticeable fumes or heat during long prints?

PLA is derived from renewable resources such as cornstarch and sugar cane, so it emits a mild sweet scent and does not require a heated bed, keeping ambient temperatures low.

What must my printer already have to use this 1.75mm PLA spool?

Your printer must accept 1.75mm diameter filament and be able to extrude PLA at standard temperatures without a heated bed.

Will the +/-0.02mm tolerance work with an older hot-end that has a worn nozzle?

The tight +/-0.02mm dimensional accuracy helps maintain consistent flow even through a slightly worn nozzle, reducing clogging risk.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。