暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

VOVOV

VOVOV Antminer S19J PRO 104TH/s 3068W 220V Mining Hardware

SKU CH-ZN9R-3HFPH

A Bitcoin miner delivering 104 TH/s hash rate at 3068 W power draw on 220–240 V AC input

  • Rated 104 TH/s computing power for Bitcoin mining
  • Draws 3068 W from 220-240 V AC supply
  • Operates at 47-63 Hz input frequency range
  • Rated for 20 A AC current input
  • Certified for altitudes up to 2000 m

VOVOV Antminer S19J PRO 104TH/s

The VOVOV Antminer S19J PRO delivers a rated computing power of 104TH/s for Bitcoin mining. It operates on an AC voltage input range of 220-240V with a frequency range of 47-63Hz. The unit draws up to 20Amp and is rated for working altitudes up to 2000M. This hardware targets miners who need high hash-rate density in a single machine.

Included power cord enables immediate 220V

The supplier title confirms a power cord is bundled with the miner. This accessory allows direct connection to a compatible 220-240V supply without sourcing a separate cable. The cord matches the unit's 20Amp input rating and 3068W power draw. No additional software or controller accessories are mentioned in the supplied data.

3068W consumption and 2000M altitude limit define

At 3068W the miner demands a robust electrical circuit and cooling capacity. Operation between 900M and 2000M altitude reduces the maximum operating temperature by 1 degree Celsius per 300M gain. The 220-240V input range suits standard industrial or data-centre supplies. Buyers without 220V infrastructure or adequate power headroom cannot use this unit.

特長

  • Rated 104 TH/s computing power for Bitcoin mining
  • Draws 3068 W from 220-240 V AC supply
  • Operates at 47-63 Hz input frequency range
  • Rated for 20 A AC current input
  • Certified for altitudes up to 2000 m

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How often do the hash boards or fans on the 104TH/s Antminer S19J PRO need replacement?

Plan to inspect fans every few months and swap them when bearings get noisy; hash boards typically run until a chip fails, which varies with power quality and ambient conditions.

What limit appears first when the 3068W unit runs continuously at 220V?

The 20A AC input ceiling is reached before the 104TH/s hash rate can be exceeded, so the power feed becomes the bottleneck.

What noise and heat should I expect from the 104TH/s miner operating 24/7 at 220-240V?

Expect data-centre noise levels from high-speed fans moving heat from 3068W; intake air above 40°C or altitudes above 900m force the unit to throttle.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。