暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Western Digital

Western Digital WD103KFBX 10TB 7200 RPM 512MB Cache 3.5" SATA internal hard drive

SKU CH-8K7P-FA41R MPN WD103KFBX

10 TB 7200 RPM CMR desktop drive with 512 MB cache and SATA 6.0 Gb/s interface for up to 24-bay NAS systems

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • Recording TechnologyCMR
  • RPM7200 RPM
  • Cache512MB
  • UsageEnterprise NAS Hard Drives

Capacity 10TB

他に 4点の構成を表示
  • Engineered for 24-bay NAS reliability with CMR technology
  • 300TB yearly workload rating supports heavy multi-user access
  • 7200 RPM and 512MB cache deliver responsive RAID performance
  • 5-year limited warranty reflects extended drive testing standards
  • 5-inch SATA 6.0Gb/s form factor fits standard enterprise bays

10TB CMR Drive for Enterprise NAS

The WD Red Pro WD103KFBX is a 10TB 3.5-inch internal hard drive built for 24/7 multi-user NAS environments. It uses CMR recording technology and a SATA 6.0Gb/s interface to deliver sustained performance in commercial and enterprise storage arrays. A 512MB cache and 7200 RPM spindle speed support high-throughput workloads. Extended factory testing and NASware 3.0 firmware enhance reliability for continuous operation.

Suits Multi-Bay RAID Arrays.

This drive targets businesses running NAS systems with up to 24 drive bays and workloads up to 300TB per year. It is designed for multi-bay RAID configurations where vibration tolerance and error recovery controls matter. Builders assembling a single-bay NAS, a standard desktop PC, or an external enclosure without RAID support will not benefit from the enterprise feature set. Shoppers needing a portable or solid-state device should consider a different form factor.

512MB Cache Buffers Heavy Random I/O

The 512MB cache is the key specification that determines suitability for metadata-heavy workloads such as virtualisation, database logging or multi-user file sharing. Larger cache capacity absorbs bursty write traffic and reduces latency during concurrent access. If the target workload is primarily sequential archival or cold storage, a drive with a smaller cache may be sufficient. Verify that the host NAS supports SATA 6.0Gb/s to utilise the full interface bandwidth.

特長

  • Engineered for 24-bay NAS reliability with CMR technology
  • 300TB yearly workload rating supports heavy multi-user access
  • 7200 RPM and 512MB cache deliver responsive RAID performance
  • 5-year limited warranty reflects extended drive testing standards
  • 5-inch SATA 6.0Gb/s form factor fits standard enterprise bays

仕様

BrandWestern Digital
SeriesRed Pro
ModelWD103KFBX
InterfaceSATA 6.0Gb/s
Capacity10TB
Recording TechnologyCMR
RPM7200 RPM
Cache512MB
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
配送重量0.84 kg
梱包サイズ194 × 130 × 64 mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 147.00mm length and 26.10mm height fit my 3.5-inch drive bay?

The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, matching the standard 3.5-inch form factor used in most desktop and NAS chassis.

Do I need a special SATA cable or controller for the 6.0Gb/s interface?

Connect the drive with a standard SATA data cable and a SATA power connector; the 6.0Gb/s link negotiates automatically with any SATA 3Gb/s or 6Gb/s port.

How often should I expect to replace a drive rated for 300TB per year?

The 300TB/year workload rating is a design target; actual replacement depends on your write volume, RAID layout and environmental conditions.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。