Western Digital WD80EFPX 8TB 5640 RPM 256MB SATA 3.5" internal hard drive
- SATA 6.0Gb/s
- 8TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Western Digital
10 TB 7200 RPM CMR desktop drive with 512 MB cache and SATA 6.0 Gb/s interface for up to 24-bay NAS systems
The WD Red Pro WD103KFBX is a 10TB 3.5-inch internal hard drive built for 24/7 multi-user NAS environments. It uses CMR recording technology and a SATA 6.0Gb/s interface to deliver sustained performance in commercial and enterprise storage arrays. A 512MB cache and 7200 RPM spindle speed support high-throughput workloads. Extended factory testing and NASware 3.0 firmware enhance reliability for continuous operation.
This drive targets businesses running NAS systems with up to 24 drive bays and workloads up to 300TB per year. It is designed for multi-bay RAID configurations where vibration tolerance and error recovery controls matter. Builders assembling a single-bay NAS, a standard desktop PC, or an external enclosure without RAID support will not benefit from the enterprise feature set. Shoppers needing a portable or solid-state device should consider a different form factor.
The 512MB cache is the key specification that determines suitability for metadata-heavy workloads such as virtualisation, database logging or multi-user file sharing. Larger cache capacity absorbs bursty write traffic and reduces latency during concurrent access. If the target workload is primarily sequential archival or cold storage, a drive with a smaller cache may be sufficient. Verify that the host NAS supports SATA 6.0Gb/s to utilise the full interface bandwidth.
| Brand | Western Digital |
|---|---|
| Series | Red Pro |
| Model | WD103KFBX |
| Interface | SATA 6.0Gb/s |
| Capacity | 10TB |
| Recording Technology | CMR |
| RPM | 7200 RPM |
| Cache | 512MB |
| Usage | Enterprise NAS Hard Drives |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| Shipping weight | 0.84 kg |
| Package size | 194 × 130 × 64 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, matching the standard 3.5-inch form factor used in most desktop and NAS chassis.
Connect the drive with a standard SATA data cable and a SATA power connector; the 6.0Gb/s link negotiates automatically with any SATA 3Gb/s or 6Gb/s port.
The 300TB/year workload rating is a design target; actual replacement depends on your write volume, RAID layout and environmental conditions.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?