暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5-inch internal hard drive with exposed circuit board on underside

Western Digital

Western Digital WD6003FFBX 6TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-K5PR-F0TG5 MPN WD6003FFBX

6 TB desktop drive at 7200 RPM with 256 MB cache and SATA 6.0Gb/s for up to 24-bay NAS systems

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • FeaturesAvailable in large capacities with support for 1-24 bays Enh
  • 6TB capacity fits multi-bay NAS up to 24 bays
  • 7200 RPM spindle speed speeds up data access
  • 256MB cache buffer smooths heavy read and write loads
  • 3D Active Balance Plus technology cuts vibration for reliable operation
  • NASware 3.0 firmware adds error recovery for enterprise workloads

WD Red Pro 6TB 3.5" SATA drive

This enterprise-class hard drive delivers 6TB of storage on a SATA 6.0Gb/s interface. It spins at 7200 RPM with a 256MB cache and uses NASware 3.0 technology for error recovery. The 3.5-inch form factor fits standard desktop drive bays.

Suited for multi-bay NAS enclosures up to 24 bays

Designed for workloads up to 300TB per year with 3D Active Balance Plus vibration control. Builds needing higher throughput than SATA provides should consider other interface types. Systems limited to fewer drive bays or lighter workloads may not require this specification level.

SATA 6.0Gb/s interface determines compatibility

The drive connects via the SATA 6.0Gb/s standard, which sets the maximum host bus transfer rate. Confirm the controller or backplane supports this interface before purchase. No other interface option exists for this model.

特長

  • 6TB capacity fits multi-bay NAS up to 24 bays
  • 7200 RPM spindle speed speeds up data access
  • 256MB cache buffer smooths heavy read and write loads
  • 3D Active Balance Plus technology cuts vibration for reliable operation
  • NASware 3.0 firmware adds error recovery for enterprise workloads

仕様

BrandWD
SeriesRed Pro
ModelWD6003FFBX
InterfaceSATA 6.0Gb/s
Capacity6TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
FeaturesAvailable in large capacities with support for 1-24 bays
Enhanced reliability with 3D Active Balance Plus technology and error recovery controls with NASware 3.0 technology
Extended drive testing to ensure each drive is tested for extended reliable operation
Vibration & Shock protection
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
配送重量0.84 kg
梱包サイズ226 × 155 × 74 mm

この商品に関する質問

Will the 147.00mm length and 26.10mm height fit my 3.5-inch drive bay?

The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, matching the standard 3.5-inch form factor used in most desktop chassis and NAS enclosures.

Do I need to change any jumper settings when installing the SATA 6.0Gb/s interface?

No jumpers are required; connect the SATA data and power cables, then initialise the 6TB volume in your operating system or NAS firmware.

How often should I check SMART data on a drive rated for 300TB per year?

Monitor SMART attributes monthly; the 5-year limited warranty covers the 7200 RPM mechanism and 256MB cache under the stated workload rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。