Seagate
Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
$23.99
0.00030554BTC
In stock
Western Digital
Western Digital WD6003FFBX 6TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive
6 TB desktop drive at 7200 RPM with 256 MB cache and SATA 6.0Gb/s for up to 24-bay NAS systems
- InterfaceSATA 6.0Gb/s
- Capacity6TB
- NAND Flash Memory TypeHard Drive
- RPM7200 RPM
- Cache256MB
- FeaturesAvailable in large capacities with support for 1-24 bays Enh
- 6TB capacity fits multi-bay NAS up to 24 bays
- 7200 RPM spindle speed speeds up data access
- 256MB cache buffer smooths heavy read and write loads
- 3D Active Balance Plus technology cuts vibration for reliable operation
- NASware 3.0 firmware adds error recovery for enterprise workloads
WD Red Pro 6TB 3.5" SATA drive
This enterprise-class hard drive delivers 6TB of storage on a SATA 6.0Gb/s interface. It spins at 7200 RPM with a 256MB cache and uses NASware 3.0 technology for error recovery. The 3.5-inch form factor fits standard desktop drive bays.
Suited for multi-bay NAS enclosures up to 24 bays
Designed for workloads up to 300TB per year with 3D Active Balance Plus vibration control. Builds needing higher throughput than SATA provides should consider other interface types. Systems limited to fewer drive bays or lighter workloads may not require this specification level.
SATA 6.0Gb/s interface determines compatibility
The drive connects via the SATA 6.0Gb/s standard, which sets the maximum host bus transfer rate. Confirm the controller or backplane supports this interface before purchase. No other interface option exists for this model.
Highlights
- 6TB capacity fits multi-bay NAS up to 24 bays
- 7200 RPM spindle speed speeds up data access
- 256MB cache buffer smooths heavy read and write loads
- 3D Active Balance Plus technology cuts vibration for reliable operation
- NASware 3.0 firmware adds error recovery for enterprise workloads
Specifications
| Brand | WD |
|---|---|
| Series | Red Pro |
| Model | WD6003FFBX |
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Cache | 256MB |
| Features | Available in large capacities with support for 1-24 bays Enhanced reliability with 3D Active Balance Plus technology and error recovery controls with NASware 3.0 technology Extended drive testing to ensure each drive is tested for extended reliable operation Vibration & Shock protection |
| Usage | Enterprise NAS Hard Drives |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| Shipping weight | 0.84 kg |
| Package size | 226 × 155 × 74 mm |
Questions about this item
Will the 147.00mm length and 26.10mm height fit my 3.5-inch drive bay?
The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, matching the standard 3.5-inch form factor used in most desktop chassis and NAS enclosures.
Do I need to change any jumper settings when installing the SATA 6.0Gb/s interface?
No jumpers are required; connect the SATA data and power cables, then initialise the 6TB volume in your operating system or NAS firmware.
How often should I check SMART data on a drive rated for 300TB per year?
Monitor SMART attributes monthly; the 5-year limited warranty covers the 7200 RPM mechanism and 256MB cache under the stated workload rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
