暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White heat-spreader UDIMM with exposed RGB light bar

XPG

XPG Lancer RGB DDR5 32GB 6000MHz CL40 desktop RAM

SKU CH-CG1Y-HKNW4

DDR5 desktop memory with 32 GB capacity, 6000 MHz speed, CL40 latency and customizable RGB lighting

  • DDR5 bandwidth boosts gaming responsiveness with 6000MHz speed
  • Customisable RGB lighting lets you match any build theme
  • PMIC and on-die ECC improve stability under heavy loads
  • Aluminium heat spreader keeps modules cool up to 85°C
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

XPG Lancer RGB DDR5 32GB 6000MHz

The XPG Lancer RGB DDR5 is a 32GB desktop memory kit rated at 6000MHz with CL40-40-40 timings. It operates at 1.25-1.45V and targets gamers and PC builders who want high-frequency DDR5 performance with customizable lighting.

Thermals noise and power draw

The module uses a crafted heatsink to dissipate heat across its operating range of 0°C to 85°C. A PMIC manages voltage regulation on the stick itself, helping maintain stable power delivery at 1.25-1.45V during sustained workloads.

Bundled software and accessories

Intel XMP 3.0 and AMD EXPO profiles let the firmware configure 6000MHz speeds automatically without manual BIOS tuning. Customizable RGB lighting can be synchronized through motherboard software for unified system aesthetics.

特長

  • DDR5 bandwidth boosts gaming responsiveness with 6000MHz speed
  • Customisable RGB lighting lets you match any build theme
  • PMIC and on-die ECC improve stability under heavy loads
  • Aluminium heat spreader keeps modules cool up to 85°C
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the XPG Lancer RGB DDR5 UDIMM and enable the 6000MHz speed without leaving it at the default JEDEC rate?

Insert the module into the motherboard DDR5 slot until the retention clips click, then enter the BIOS and activate the Intel XMP 3.0 or AMD EXPO profile so the kit runs at its rated 6000MHz CL40 instead of the base speed.

What maintenance or replacement will the PMIC and on-die ECC on this DDR5 kit require over time?

The integrated PMIC and on-die ECC have no user-serviceable parts; if errors exceed the correction capability or the PMIC fails, the entire 32GB module must be replaced.

At what temperature does the XPG Lancer RGB DDR5 hit its thermal limit during sustained loads?

The operating temperature ceiling is 85°C; prolonged operation at or above this point will trigger throttling or shutdown to protect the memory chips and PMIC.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。