暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square black 35mm case fan 10mm thick hydraulic bearing three wire

Zyvpee

Zyvpee 3510 35mm Hydraulic 3-Wire DC 12V 0.04A Case Fan

SKU CH-V778-QSXK2

A 35 mm hydraulic case fan with a 3-wire 12 V DC motor drawing 0.04 A for compact CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Fan Size35mm
  • Bearing TypeHydraulic
  • Power Connector3 Wires
  • ColorBlack
  • 35 mm square frame fits tight CPU cooler spaces
  • Hydraulic bearing runs quietly and lasts longer than sleeve types
  • 12 V DC at 0.04 A draws minimal power from the system
  • Three-wire connector enables RPM monitoring for fan control
  • Slim 10 mm thickness clears low-profile heatsinks and cramped cases

Compact 35 mm CPU cooler fan

The Zyvpee 3510 is a 35 mm square case fan designed for tight CPU cooler mounts where a full-size unit will not fit. It runs on 12 V DC and draws only 0.04 A, making it a low-power choice for small-form-factor builds or replacement cooling on compatible heatsinks. The hydraulic bearing aims to reduce noise and extend service life in continuous operation. Its 3.5 cm footprint suits confined layouts that need targeted airflow.

3-wire hydraulic bearing build

A 3-wire power connector supplies tachometer feedback so the motherboard can monitor speed without PWM control. The hydraulic bearing uses a fluid film to minimise friction, offering quieter running than sleeve alternatives at this scale. The black, non-LED frame keeps the appearance neutral for any build colour scheme. Dimensions of 35 by 35 by 10 mm confirm a slim profile that slides into narrow cooler shrouds or chassis vents.

Limits of the 35 mm DC interface

The fixed 12 V DC input means speed scales with voltage; no 4-pin PWM header is present for automatic curve control. At 0.04 A the maximum airflow is modest, so this fan suits spot cooling or supplemental airflow rather than primary CPU thermal loads. Builders needing variable speed headers or higher static pressure should verify motherboard connector compatibility before purchase.

特長

  • 35 mm square frame fits tight CPU cooler spaces
  • Hydraulic bearing runs quietly and lasts longer than sleeve types
  • 12 V DC at 0.04 A draws minimal power from the system
  • Three-wire connector enables RPM monitoring for fan control
  • Slim 10 mm thickness clears low-profile heatsinks and cramped cases

仕様

Series3510
Model3510
TypeCase Fan
CompatibilityCPU Cooler
Fan Size35mm
Bearing TypeHydraulic
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions35*35*10mm

この商品に関する質問

What does the 3-wire connector provide on the 3510 fan?

The 3-wire connector supplies 12 V power, ground and a tachometer signal so the motherboard can monitor the 35 mm fan speed.

What clearance does the 35 mm square frame need to mount?

The 3510 measures 35 mm by 35 mm by 10 mm thick, so it fits any 35 mm mounting holes with at least 10 mm depth.

How is the 3510 fan installed and what step is often missed?

Align the four corners with the 35 mm screw holes, secure with screws and plug the 3-wire header into the CPU fan connector so the tach signal is read.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。