暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 90mm square case fan, 25mm thick, three-wire connector

Zyvpee

Zyvpee AD0924HX-A72GL 90mm 9025 DC24V 0.15A 3 Pin Inverter Cooling Case Fan

SKU CH-NC3T-C2JBH

A 90 mm hydraulic-bearing case fan with a 25 mm profile, 3-pin DC 24 V power and inverter-cooling design

  • TypeCPU Cooler Fan
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling
  • 90 mm frame fits standard 9025 mounting
  • DC 24 V 0.15 A draws minimal power
  • Hydraulic bearing reduces friction noise
  • Three-pin connector enables speed monitoring
  • Inverter-rated design handles variable loads

90 mm 24 V Inverter Cooling Fan

This Zyvpee AD0924HX-A72GL is a 90 mm square case fan with a 25 mm thickness. It runs on a 24 V DC supply drawing 0.15 A and connects through a three-pin power connector. The hydraulic bearing and black non-LED frame are built for inverter cooling duties in industrial or server enclosures.

Suited For 24 V Three-Pin Headers

The fan fits builders who have a 24 V three-pin header available and need a 9025 form factor for targeted airflow. It is not for systems that lack a 24 V rail or that require a different connector pitch or pin count for speed control.

24 V 0.15 A Electrical Rating

The decisive specification is the 24 V 0.15 A power requirement; the motherboard or controller must supply exactly that voltage and current through a three-pin header for the fan to operate correctly.

特長

  • 90 mm frame fits standard 9025 mounting
  • DC 24 V 0.15 A draws minimal power
  • Hydraulic bearing reduces friction noise
  • Three-pin connector enables speed monitoring
  • Inverter-rated design handles variable loads

仕様

Brand3ccooler.com
SeriesAD0924HX-A72GL
ModelAD0924HX-A72GL
TypeCPU Cooler Fan
Bearing TypeHydraulic
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions90*25mm

この商品に関する質問

Will this 90mm fan fit a standard 90mm mounting pattern?

The fan measures 90 by 25 millimetres and uses the common 90mm square mounting holes.

How do I connect the three-pin connector to a 24 volt DC source?

Match the three wires to the corresponding pins on a 24V header; the third wire carries the tachometer signal.

When should I expect to replace the hydraulic bearing in this inverter cooling fan?

Hydraulic bearings typically run for many thousands of hours; replace the fan when noise or vibration increases noticeably.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。