Zyvpee
Zyvpee AD0924HX-A72GL 90mm 9025 DC24V 0.15A 3 Pin Inverter Cooling Case Fan
A 90 mm hydraulic-bearing case fan with a 25 mm profile, 3-pin DC 24 V power and inverter-cooling design
- TypeCPU Cooler Fan
- Bearing TypeHydraulic
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesInverter Cooling
- 90 mm frame fits standard 9025 mounting
- DC 24 V 0.15 A draws minimal power
- Hydraulic bearing reduces friction noise
- Three-pin connector enables speed monitoring
- Inverter-rated design handles variable loads
90 mm 24 V Inverter Cooling Fan
This Zyvpee AD0924HX-A72GL is a 90 mm square case fan with a 25 mm thickness. It runs on a 24 V DC supply drawing 0.15 A and connects through a three-pin power connector. The hydraulic bearing and black non-LED frame are built for inverter cooling duties in industrial or server enclosures.
Suited For 24 V Three-Pin Headers
The fan fits builders who have a 24 V three-pin header available and need a 9025 form factor for targeted airflow. It is not for systems that lack a 24 V rail or that require a different connector pitch or pin count for speed control.
24 V 0.15 A Electrical Rating
The decisive specification is the 24 V 0.15 A power requirement; the motherboard or controller must supply exactly that voltage and current through a three-pin header for the fan to operate correctly.
Pluspunten
- 90 mm frame fits standard 9025 mounting
- DC 24 V 0.15 A draws minimal power
- Hydraulic bearing reduces friction noise
- Three-pin connector enables speed monitoring
- Inverter-rated design handles variable loads
Specificaties
| Brand | 3ccooler.com |
|---|---|
| Series | AD0924HX-A72GL |
| Model | AD0924HX-A72GL |
| Type | CPU Cooler Fan |
| Bearing Type | Hydraulic |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling |
| Dimensions | 90*25mm |
Vragen over dit artikel
Will this 90mm fan fit a standard 90mm mounting pattern?
The fan measures 90 by 25 millimetres and uses the common 90mm square mounting holes.
How do I connect the three-pin connector to a 24 volt DC source?
Match the three wires to the corresponding pins on a 24V header; the third wire carries the tachometer signal.
When should I expect to replace the hydraulic bearing in this inverter cooling fan?
Hydraulic bearings typically run for many thousands of hours; replace the fan when noise or vibration increases noticeably.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
US$ 39,99
0.00051691BTC
Op voorraad