暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee DAZD1225R2U P0FF 120mm 25mm 4-wire PWM case fan

SKU CH-HME0-Y6QSV

120 mm hydraulic-bearing case fan with 25 mm thickness and 4-wire PWM control

  • TypeCPU Cooler Fan
  • Bearing TypeHydraulic
  • Power Connector4 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Hydraulic bearing for quiet operation and long life
  • 4-wire PWM enables precise speed control via motherboard
  • 120 mm x 25 mm fits standard case mounts
  • 12 V DC 0.5 A power draw keeps energy use low
  • Non-LED black frame suits stealth builds

Zyvpee 120 mm PWM Case Fan

The Zyvpee DAZD1225R2U P0FF is a 120 mm by 25 mm case fan built for standard chassis ventilation. It runs on 12 V DC at 0.5 A and uses a four-wire PWM connector for automatic speed control. A hydraulic bearing supplies the rotating assembly.

Suits PWM-controlled builds.

This unit suits builders who want motherboard-managed fan curves through a 4-pin PWM header. It will not provide variable speed control on older 3-pin voltage-controlled headers or on 2-pin fixed-voltage connectors. Buyers needing addressable RGB lighting or a different frame thickness should look elsewhere.

4-wire PWM connector decides compatibility

The single specification that determines fit is the 4-wire PWM power connector. Your motherboard or fan controller must supply a matching 4-pin PWM header to enable speed regulation. Without that header the fan will not operate as intended.

特長

  • Hydraulic bearing for quiet operation and long life
  • 4-wire PWM enables precise speed control via motherboard
  • 120 mm x 25 mm fits standard case mounts
  • 12 V DC 0.5 A power draw keeps energy use low
  • Non-LED black frame suits stealth builds

仕様

Brand3ccooler.com
SeriesDAZD1225R2U P0FF
ModelDAZD1225R2U P0FF
TypeCPU Cooler Fan
Bearing TypeHydraulic
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions120*25mm

この商品に関する質問

How can I verify the fan is running correctly after installation?

Connect the 4-wire PWM connector to the motherboard header, then check BIOS or monitoring software to confirm the fan spins and responds to temperature changes.

What is included in the box and what must be purchased separately?

The box contains the 120mm × 25mm hydraulic-bearing fan with a 4-wire PWM lead; mounting screws and any fan controller are not included.

Which version should I choose for a standard 120 mm case mount?

The DAZD1225R2U P0FF model is built for 120 mm × 25 mm mounts and draws 0.5 A at 12 V, matching typical case and CPU-cooler positions.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。