Zyvpee
Zyvpee DAZD1225R2U P0FF 120mm 25mm 4-wire PWM case fan
120 mm hydraulic-bearing case fan with 25 mm thickness and 4-wire PWM control
- TypeCPU Cooler Fan
- Bearing TypeHydraulic
- Power Connector4 Wires
- ColorBlack
- LEDNon-LED
- FeaturesCPU Fan
- Hydraulic bearing for quiet operation and long life
- 4-wire PWM enables precise speed control via motherboard
- 120 mm x 25 mm fits standard case mounts
- 12 V DC 0.5 A power draw keeps energy use low
- Non-LED black frame suits stealth builds
Zyvpee 120 mm PWM Case Fan
The Zyvpee DAZD1225R2U P0FF is a 120 mm by 25 mm case fan built for standard chassis ventilation. It runs on 12 V DC at 0.5 A and uses a four-wire PWM connector for automatic speed control. A hydraulic bearing supplies the rotating assembly.
Suits PWM-controlled builds.
This unit suits builders who want motherboard-managed fan curves through a 4-pin PWM header. It will not provide variable speed control on older 3-pin voltage-controlled headers or on 2-pin fixed-voltage connectors. Buyers needing addressable RGB lighting or a different frame thickness should look elsewhere.
4-wire PWM connector decides compatibility
The single specification that determines fit is the 4-wire PWM power connector. Your motherboard or fan controller must supply a matching 4-pin PWM header to enable speed regulation. Without that header the fan will not operate as intended.
Highlights
- Hydraulic bearing for quiet operation and long life
- 4-wire PWM enables precise speed control via motherboard
- 120 mm x 25 mm fits standard case mounts
- 12 V DC 0.5 A power draw keeps energy use low
- Non-LED black frame suits stealth builds
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | DAZD1225R2U P0FF |
| Model | DAZD1225R2U P0FF |
| Type | CPU Cooler Fan |
| Bearing Type | Hydraulic |
| Power Connector | 4 Wires |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 120*25mm |
Questions about this item
How can I verify the fan is running correctly after installation?
Connect the 4-wire PWM connector to the motherboard header, then check BIOS or monitoring software to confirm the fan spins and responds to temperature changes.
What is included in the box and what must be purchased separately?
The box contains the 120mm × 25mm hydraulic-bearing fan with a 4-wire PWM lead; mounting screws and any fan controller are not included.
Which version should I choose for a standard 120 mm case mount?
The DAZD1225R2U P0FF model is built for 120 mm × 25 mm mounts and draws 0.5 A at 12 V, matching typical case and CPU-cooler positions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
