暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60 by 60 by 25 mm square case fan with two wires

Zyvpee

Zyvpee DFB0612H 60x25mm 12V .15A ball bearing 2-wire case fan

SKU CH-GNZR-QXJK2

A 60 × 25 mm ball-bearing case fan running on 12 V at .15 A with a two-wire power connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • Ball bearing reduces wear for longer service life
  • 12 V 0.15 A draws little power from the PSU
  • 60 x 25 mm frame fits tight 6 cm mounting points
  • Two-wire power connector simplifies installation
  • Non-LED black design keeps the build dark

Compact 60 mm case fan

The Zyvpee DFB0612H is a 60 mm square case fan designed for tight chassis spaces where a small DC cooler is required. It suits builders who need a basic airflow device for legacy hardware or specialised enclosures. The two-wire power connector provides simple 12 V operation without speed reporting or PWM control.

Ball bearing thermals and power

A ball bearing supports the rotor for consistent rotation and a rated current of .15 A at 12 V. The non-LED black frame runs quietly enough for office or home theatre builds while moving air through the 25 mm thick frame. Power draw stays low, making it suitable for auxiliary cooling spots.

Sustained load behaviour

Under continuous duty the ball bearing maintains stable speed without the wear-in period seen in sleeve designs. The two-wire design means voltage changes directly alter rpm, so the fan tracks system temperature linearly. It is not suited for builds that require automatic speed curves or header monitoring.

特長

  • Ball bearing reduces wear for longer service life
  • 12 V 0.15 A draws little power from the PSU
  • 60 x 25 mm frame fits tight 6 cm mounting points
  • Two-wire power connector simplifies installation
  • Non-LED black design keeps the build dark

仕様

SeriesDFB0612H
ModelDFB0612H
TypeCase Fan
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

この商品に関する質問

How do I install this 60 x 25 mm 12 V fan using the two-wire connector?

Mount the fan in a 60 mm square cut-out with four screws, then connect the two wires to a 12 V header or molex adapter matching the .15 A draw; the step often missed is confirming polarity before powering on.

What maintenance will the ball-bearing DFB0612H need over time?

Ball bearings are sealed, so no lubrication is required; if noise or vibration appears after extended use, the entire fan is replaced rather than serviced.

At what point does the .15 A current limit become the constraint during continuous operation?

The .15 A rating is the steady-state maximum; sustained loads that push the motor beyond this draw will trigger the supply’s current limit or cause the fan to stall.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。