暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 40mm square case fan 10mm thick two wires

Zyvpee

Zyvpee KDE1204PFVX 40mm 12V 1.8W 2 Pin Maglev case fan

SKU CH-D9QD-R5XTW

A 40 mm Maglev case fan running below 1600 RPM at 12 V and 1.8 W with a 2-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Maglev bearing cuts friction for quieter operation
  • 12 V 1.8 W draw keeps power use low
  • 40 mm frame fits tight CPU-cooler spaces
  • 2-pin connector simplifies installation
  • Sub-1600 RPM speed balances airflow and noise

Zyvpee KDE1204PFVX 40 mm Maglev Fan

This 40 mm case fan runs on 12 V and draws 1.8 W through a two-pin connector. The Maglev bearing keeps noise low at speeds below 1600 RPM. Its 40 x 10 mm frame fits tight CPU cooler cut-outs and small-form-factor chassis.

Suits builds needing a compact 12 V replacement

Buyers who need PWM control, a three- or four-pin header, LED illumination, or a larger frame size should look elsewhere. The fixed two-wire design offers no speed signalling, so it cannot report RPM to the motherboard.

Key spec: 40 x 10 mm two-pin 12 V Maglev

This single combination of mounting footprint, voltage, connector and bearing decides whether the fan fits your cooler bracket and header. Verify those four points against your hardware before ordering.

特長

  • Maglev bearing cuts friction for quieter operation
  • 12 V 1.8 W draw keeps power use low
  • 40 mm frame fits tight CPU-cooler spaces
  • 2-pin connector simplifies installation
  • Sub-1600 RPM speed balances airflow and noise

仕様

BrandZyvpee
SeriesKDE1204PFVX
ModelKDE1204PFVX
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Dimensions40*10MM

この商品に関する質問

Does the maglev bearing in the Zyvpee KDE1204PFVX need lubrication or replacement over time?

Maglev bearings use magnetic levitation instead of physical contact, so there is no oil to dry out and no sleeve to wear down. The fan is rated for continuous operation without scheduled bearing maintenance.

What limits the airflow of this 40 mm fan when it runs continuously at 12 V?

The motor is specified at 1.8 W and the speed ceiling is below 1600 RPM, so the aerodynamic curve of the 40×10 mm frame becomes the bottleneck before the motor reaches its thermal limit.

How much noise and heat does the fan produce during all-day use?

At 1.8 W the motor generates very little waste heat, and the maglev design keeps acoustic output low even during continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。