A-Tech
A-Tech 128GB DDR5 4800 ECC RDIMM Server RAM
128 GB DDR5-4800 ECC RDIMM with 4Rx4 rank, CL40 latency and 1.10 V operation for compatible HP/HPE servers
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS Latency40
- Voltage1.10V
- ECCYes
- 128 GB module expands server capacity for heavy workloads
- DDR5 4800 MHz speed moves data fast with PC5-38400 bandwidth
- ECC RDIMM with 4Rx4 rank detects and corrects memory errors
- 1 V standard voltage keeps power draw low per module
- Compatible replacement for HP/HPE P43334-B21 and related part numbers
High-Capacity Server Memory Upgrade
This A-Tech module delivers 128GB of DDR5 4800 ECC RDIMM capacity in a single 288-pin stick. It targets administrators expanding memory in compatible HP/HPE servers and workstations that require registered, error-correcting modules. The 4Rx4 organisation with 3DS/TSV stacking suits high-density configurations where maximum RAM per slot is essential.
Thermals Noise and Power Draw
Operating at the standard 1.1V DDR5 voltage, the module draws minimal power for its density and runs without a heat spreader. Registered buffering reduces electrical load on the memory controller, helping maintain stable thermals in densely populated chassis. Passive cooling relies on system airflow; no active noise is generated by the memory itself.
Upgrade Path and Value
The stick replaces HP/HPE part numbers including P43334-B21, P48503-001, P43336-0A1, P50313-B21, P56154-001, P43336-1A1, P64752-001 and P43336-6A1. It is not suited for desktop platforms, consumer motherboards or systems requiring unbuffered UDIMMs or lower-density ranks. Buyers needing non-ECC memory or speeds beyond 4800 MT/s should look elsewhere.
주요 특징
- 128 GB module expands server capacity for heavy workloads
- DDR5 4800 MHz speed moves data fast with PC5-38400 bandwidth
- ECC RDIMM with 4Rx4 rank detects and corrects memory errors
- 1 V standard voltage keeps power draw low per module
- Compatible replacement for HP/HPE P43334-B21 and related part numbers
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP/HPE P43334-B21 P48503-001 P43336-0A1 P50313-B21 P56154-001 P43336-1A1 P64752-001 P43336-6A1 |
| Model | A-Tech 128GB DDR5-4800 ECC RDIMM Server RAM Module |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
이 상품에 대한 질문
How do I install the 288-pin DDR5 RDIMM and which step is often missed?
Align the notch on the module with the slot key, press firmly until both retention clips click shut, then verify the 1.10V operating voltage is detected in the system BIOS before booting the OS.
What maintenance or replacement will the 128GB ECC RDIMM need over its service life?
No scheduled maintenance is required; the module uses major-brand DRAM ICs and ECC error correction handles single-bit errors transparently, so replacement is only necessary if a multi-bit failure is reported by the server management console.
What limit appears first when the 4Rx4 3DS module runs at 4800MHz under sustained load?
The CAS latency of 40 cycles becomes the primary timing constraint during continuous high-throughput workloads, as the registered buffer and 1.1V voltage ceiling prevent further frequency scaling.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



