저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

A-Tech

A-Tech 32GB (4x8GB) DDR4 2933 ECC UDIMM 1Rx8 CL21 1.20V Server RAM

SKU CH-S0AP-3N5PV

A 32GB quad-channel DDR4 ECC UDIMM kit running at 2933 MHz with CL21 latency and 1.20V for servers and workstations

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR4 2933 MHz CL21 timing accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 20 V standard voltage keeps power draw low
  • 288-pin single-rank 1Rx8 modules fit compatible DDR4 server slots

Server & Workstation DDR4 Kit

This A-Tech 32GB kit contains four 8GB DDR4 2933 ECC UDIMM modules built for servers and workstations. Each stick runs at 1.20V with a CL21 latency and a single-rank 1Rx8 layout. The 288-pin unbuffered design fits compatible DDR4 platforms that require error-correcting memory. It is not suitable for standard desktop or laptop computers.

Sustained-Load Behaviour

The quad-channel configuration spreads traffic across four modules to keep bandwidth steady during long-running workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing data corruption that can accumulate over hours of continuous operation. Major-brand chips and factory testing aim to deliver consistent throughput without throttling. Single-rank organisation helps maintain predictable timing under heavy multi-threaded demand.

Thermals Noise & Power

Operating at the standard 1.20V DDR4 voltage keeps power draw low and reduces heat output inside dense chassis. No heat spreaders are fitted, so airflow from system fans passes directly over the DRAM packages. The modules run silently because they have no moving parts or active cooling. Low thermal contribution helps maintain stable temperatures in packed server enclosures.

주요 특징

  • 32 GB quad-channel kit expands server memory capacity
  • DDR4 2933 MHz CL21 timing accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 20 V standard voltage keeps power draw low
  • 288-pin single-rank 1Rx8 modules fit compatible DDR4 server slots

사양

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 1Rx8 PC4-2933Y-E
Part NumberAT8G4D4D2933ES8N12V
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much power does this quad-channel 32GB DDR4 2933 kit draw at its rated 1.20V when running continuously?

Each 8GB module operates at the standard DDR4 voltage of 1.20V; total system draw depends on your server's memory controller and workload.

What must the motherboard provide to run this ECC UDIMM kit at 2933 MHz CL21?

The board must support DDR4 ECC unbuffered DIMMs, 288-pin slots, quad-channel architecture, and be able to run at 2933 MHz with CL21 timings at 1.20V.

Will these single-rank 1Rx8 DDR4 2933 modules work in the same server as existing DDR4 ECC UDIMMs of a different speed?

Mixed-speed DDR4 ECC UDIMMs will usually run at the lowest common speed; check your system manual for supported mixed-rank and mixed-speed configurations.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.