A-Tech 64GB (8x8GB) DDR4 2400 ECC RDIMM 1Rx4 288-Pin Server RAM
- 64GB (8 x 8GB)
- DDR4 2400 (PC4 1920…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
A 32GB quad-channel DDR4 ECC UDIMM kit running at 2933 MHz with CL21 latency and 1.20V for servers and workstations
Capacity 32GB (4 x 8GB)
This A-Tech 32GB kit contains four 8GB DDR4 2933 ECC UDIMM modules built for servers and workstations. Each stick runs at 1.20V with a CL21 latency and a single-rank 1Rx8 layout. The 288-pin unbuffered design fits compatible DDR4 platforms that require error-correcting memory. It is not suitable for standard desktop or laptop computers.
The quad-channel configuration spreads traffic across four modules to keep bandwidth steady during long-running workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing data corruption that can accumulate over hours of continuous operation. Major-brand chips and factory testing aim to deliver consistent throughput without throttling. Single-rank organisation helps maintain predictable timing under heavy multi-threaded demand.
Operating at the standard 1.20V DDR4 voltage keeps power draw low and reduces heat output inside dense chassis. No heat spreaders are fitted, so airflow from system fans passes directly over the DRAM packages. The modules run silently because they have no moving parts or active cooling. Low thermal contribution helps maintain stable temperatures in packed server enclosures.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx8 PC4-2933Y-E |
| Part Number | AT8G4D4D2933ES8N12V |
| Capacity | 32GB (4 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each 8GB module operates at the standard DDR4 voltage of 1.20V; total system draw depends on your server's memory controller and workload.
The board must support DDR4 ECC unbuffered DIMMs, 288-pin slots, quad-channel architecture, and be able to run at 2933 MHz with CL21 timings at 1.20V.
Mixed-speed DDR4 ECC UDIMMs will usually run at the lowest common speed; check your system manual for supported mixed-rank and mixed-speed configurations.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?