SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501644BTC
재고 있음
A-Tech
A-Tech 4GB DDR3 1333 ECC UDIMM 2Rx8 for Nanya NT4GC72B8PB0NF-CG Server Memory
A 4GB DDR3 1333 ECC UDIMM module with 2Rx8 rank and 1.5V operation for server memory upgrades
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCYes
- Buffered/RegisteredUnbuffered
- ECC protection guards data integrity with built-in error correction
- 1333 MHz DDR3 speed matches PC3-10600 server specifications
- 2Rx8 dual-rank layout optimises memory controller efficiency
- 5 V standard voltage ensures broad platform compatibility
- 240-pin UDIMM form factor fits DDR3 server slots
4GB DDR3 1333 ECC UDIMM Server Memory
This 4GB DDR3 1333 ECC UDIMM module is built as a compatible replacement for the Nanya NT4GC72B8PB0NF-CG part. It runs at 1333 MHz (PC3-10600) with CL9 latency and standard 1.5V operation. The 240-pin DIMM uses a 2Rx8 organisation and major-brand chips. It targets servers and workstations that require error-correcting unbuffered memory.
Who this suits and who should look elsewhere
This module fits systems that accept DDR3 1333 ECC UDIMM memory in a 240-pin slot. It is not for platforms that require registered or load-reduced DIMMs, nor for boards limited to non-ECC memory. Buyers needing capacities beyond 4GB per slot or speeds above 1333 MHz must select a different part.
The specification that decides fit
The decisive specification is the DDR3 1333 ECC UDIMM 240-pin form factor with 2Rx8 organisation at 1.5V. Only systems that explicitly support this exact combination will recognise and operate the module correctly.
주요 특징
- ECC protection guards data integrity with built-in error correction
- 1333 MHz DDR3 speed matches PC3-10600 server specifications
- 2Rx8 dual-rank layout optimises memory controller efficiency
- 5 V standard voltage ensures broad platform compatibility
- 240-pin UDIMM form factor fits DDR3 server slots
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Nanya |
| Model | NT4GC72B8PB0NF-CG |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | NT4GC72B8PB0NF-CG |
이 상품에 대한 질문
How do I install this 240-pin DDR3 ECC UDIMM, and what step do people often get wrong?
Align the notch on the module with the key in the 240-pin slot, press straight down until both retention clips click, and verify the system detects 4 GB at 1333 MHz; the common error is inserting the stick at an angle, which can bend pins or leave one clip unlatched.
What maintenance or replacement will this 4 GB 1.50 V DDR3 module need later?
No routine maintenance is required; if errors appear, run a memory diagnostic and replace the module if it fails — ECC corrects single-bit errors but cannot fix a failing chip.
What limit appears first when this 2Rx8 PC3-10600 stick runs under sustained load?
The 1333 MHz data rate and CL9 latency set the bandwidth ceiling; thermal throttling is rare at 1.50 V, so the speed rating is the first bottleneck you will hit.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
