EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
4GB DDR3 1600MHz ECC UDIMM server memory module with CL11 latency and 1.5V operation
This 4GB DDR3 1600MHz ECC UDIMM module replaces specific HP part numbers including 662609-571, 662609-574, 669238-071, 669322-B21, 669322-B212, 682413-001, 684034-001 and A2H32AV. It uses a 240-pin DIMM form factor and operates at the standard 1.5V voltage for DDR3 memory.
Suitable for servers and workstations that accept unbuffered ECC DDR3 memory at PC3-12800 speed. Builders needing registered DIMMs, higher capacities, or different voltage requirements should verify their system documentation before ordering.
The dual-rank 2Rx8 organisation with CL11 latency determines compatibility with the memory controller. Systems requiring single-rank modules or a different rank structure will not support this stick.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module operates at the standard DDR3 voltage of 1.5V; actual power draw depends on your server's workload and memory-controller efficiency.
A DDR3 DIMM slot that supports unbuffered ECC memory at 1600 MHz and can accept a 2Rx8 4 GB module.
The system will run all modules at the slowest common speed and highest latency; mixing CL11 with CL9 means the CL9 sticks will operate at CL11 timings.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?