SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501067BTC
재고 있음
A-Tech
A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 Server RAM
8GB DDR3L 1333MHz ECC registered server memory module with 1.35V low voltage operation
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB DDR3L 1333MHz capacity handles demanding server workloads
- ECC registered design protects data integrity in critical applications
- 35V low-voltage operation reduces power draw and heat
- 240-pin 2Rx4 form factor fits compatible HP server slots
- Compatible replacement for HP part numbers including 647650-071 and 500662-B21
8GB DDR3L 1333MHz ECC Registered Server Module
This single 8GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 240-pin DIMM form factor and includes ECC with registered buffering for error correction and signal stability in server platforms.
Suited for HP systems referencing the listed part
The module matches HP part numbers including 500662, 604502, 604506, 606425, 606427, 647650, 647877 and 647897. It is not for desktop boards that require unbuffered non-ECC memory or for platforms that only support higher-voltage DDR3 at 1.5V.
Fits 240-pin DDR3 slots
The registered design places a register between the DRAM and the memory controller, reducing electrical load on the bus. This frees the platform to populate more slots per channel while the low 1.35V draws less power than standard DDR3.
주요 특징
- 8GB DDR3L 1333MHz capacity handles demanding server workloads
- ECC registered design protects data integrity in critical applications
- 35V low-voltage operation reduces power draw and heat
- 240-pin 2Rx4 form factor fits compatible HP server slots
- Compatible replacement for HP part numbers including 647650-071 and 500662-B21
사양
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
이 상품에 대한 질문
What server slot and voltage must my system provide for this DDR3L 1333 MHz 1.35 V 240-pin RDIMM to operate?
Your server needs a DDR3 240-pin DIMM slot that supplies 1.35 V and supports registered ECC modules at 1333 MHz.
Will this 2Rx4 CL9 registered ECC module run with my existing 1Rx8 CL9 DDR3L RDIMMs in the same channel?
Mixing 2Rx4 and 1Rx8 registered ECC DIMMs is often supported but depends on the server BIOS; populate identical ranks per channel for best stability.
How can I confirm the module is detected at DDR3-1333 CL9 with ECC active after installation?
Check the BIOS memory information or run a tool such as dmidecode or CPU-Z to verify speed 1333 MT/s, CAS 9, and ECC enabled.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
