저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green rectangular SO-DIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1600 SO-DIMM 204-Pin 1.35V

SKU CH-K77F-VY45H

8GB DDR3L 1600 SO-DIMM laptop memory upgrade running at 1.35V with CL11 latency

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8GB capacity lets you run more applications at once
  • 1600 MHz DDR3L speed matches PC3L-12800 system specs
  • 35 V low-voltage operation reduces laptop power draw
  • CL11 latency keeps data access responsive
  • 204-pin SO-DIMM form factor fits standard laptop slots

What this module is and who needs it

This A-Tech 8 GB DDR3L 1600 SO-DIMM is a direct replacement for the Micron MT18KSF1G72HZ-1G6P1ZE module. It is built for laptops, notebooks and all-in-one systems that accept 204-pin DDR3L memory running at 1.35 V. The unbuffered, non-ECC design matches the original specification and is tested for reliable operation.

Who should buy it and who should not

Buyers who need an 8 GB DDR3L 1600 SO-DIMM to replace a failed Micron stick or to add capacity in a compatible slot will find this module fits the requirement. Systems that require ECC, registered memory, 1.5 V DDR3, or a different pin count cannot use this part. Buyers who want more than 8 GB per slot should look at a different module.

The specification that decides compatibility

The module is a 204-pin DDR3L SO-DIMM rated at 1600 MHz (PC3L-12800) with a CAS latency of CL11 and a voltage of 1.35 V. Your system must support DDR3L at this voltage and speed in an unbuffered, non-ECC configuration for the module to work.

주요 특징

  • 8GB capacity lets you run more applications at once
  • 1600 MHz DDR3L speed matches PC3L-12800 system specs
  • 35 V low-voltage operation reduces laptop power draw
  • CL11 latency keeps data access responsive
  • 204-pin SO-DIMM form factor fits standard laptop slots

사양

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF1G72HZ-1G6P1ZE
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT18KSF1G72HZ-1G6P1ZE
Recommend UseCompatible Replacement for Micron MT18KSF1G72HZ-1G6P1ZE

이 상품에 대한 질문

Will the 204-pin SO-DIMM fit my laptop's memory slot?

This module uses the standard 204-pin DDR3 SO-DIMM form factor used by most laptops and AIOs that support DDR3L memory.

Do I need to change any BIOS settings after inserting the CL11 module?

Install the stick with the notch aligned, press firmly until the side clips click; the BIOS will detect the 1600 MHz speed and 1.35 V voltage automatically.

Does the unbuffered non-ECC design mean I must replace it on a schedule?

No scheduled replacement is required; solid-state DRAM has no moving parts and the module is tested for long-term reliability.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.