SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501657BTC
재고 있음
A-Tech
A-Tech 8GB DDR5 5600 Desktop RAM Micron MTC4C10163S1UC56BD1 1Rx16
8GB DDR5 desktop module running at 5600 MHz with CL40 latency and 1.1 V operation
- Capacity8GB
- SpeedDDR5 5600 (PC5 44800)
- Tested Frequency5600
- CAS Latency40
- Voltage1.10V
- ECCNo
- 8 GB capacity lets you run more applications at once
- DDR5 5600 speed moves data at 5600 MT/s
- 1 V operation keeps power draw low
- 288-pin DIMM fits standard desktop slots
- 1Rx16 single-rank layout supports broad compatibility
8GB DDR5 5600 Desktop Memory
This A-Tech module is a direct replacement for Micron part MTC4C10163S1UC56BD1. It provides 8GB of DDR5 memory rated at 5600 MT/s with PC5-44800 bandwidth. The unbuffered non-ECC DIMM suits desktop systems that require a single 1Rx16 rank module.
Installing the 288-pin DIMM
Align the notch with the slot key and press firmly until the retention clips click. The module runs at the standard DDR5 voltage of 1.1V and carries a CAS latency of 40. No heat spreader is fitted, so ensure adequate airflow inside the case.
Check motherboard DDR5 support
Verify that your board accepts DDR5 DIMMs and can operate at 5600 MT/s with 1.1V modules. Consult the manual for approved population rules and channel configuration before ordering.
주요 특징
- 8 GB capacity lets you run more applications at once
- DDR5 5600 speed moves data at 5600 MT/s
- 1 V operation keeps power draw low
- 288-pin DIMM fits standard desktop slots
- 1Rx16 single-rank layout supports broad compatibility
사양
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron MTC4C10163S1UC56BD1 |
| Model | A-Tech 8GB DDR5-5600 Desktop RAM Module |
| Capacity | 8GB |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Micron Chipset |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Micron MTC4C10163S1UC56BD1 |
이 상품에 대한 질문
How do I confirm the module runs at 5600 MT/s with CL40 after installation?
Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s and the CAS latency shows 40 at 1.10 V.
What comes in the package and is anything else required?
The box contains one 8 GB DDR5 288-pin DIMM with Micron chipset and green/black PCB; no heat spreader or extra cables are included and nothing else is needed for installation.
Which version should I choose if my board calls for a 1Rx16 non-ECC DDR5 DIMM at 5600?
This single 8 GB 1Rx16 unbuffered module matches that exact specification; select it when you need one rank at the standard 1.1 V DDR5 voltage.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
