We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, 288-pin DDR5 DIMM, no heat spreader

A-Tech

A-Tech 8GB DDR5 5600 Desktop RAM Micron MTC4C10163S1UC56BD1 1Rx16

SKU CH-6ACK-DC950

8GB DDR5 desktop module running at 5600 MHz with CL40 latency and 1.1 V operation

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • 8 GB capacity lets you run more applications at once
  • DDR5 5600 speed moves data at 5600 MT/s
  • 1 V operation keeps power draw low
  • 288-pin DIMM fits standard desktop slots
  • 1Rx16 single-rank layout supports broad compatibility

8GB DDR5 5600 Desktop Memory

This A-Tech module is a direct replacement for Micron part MTC4C10163S1UC56BD1. It provides 8GB of DDR5 memory rated at 5600 MT/s with PC5-44800 bandwidth. The unbuffered non-ECC DIMM suits desktop systems that require a single 1Rx16 rank module.

Installing the 288-pin DIMM

Align the notch with the slot key and press firmly until the retention clips click. The module runs at the standard DDR5 voltage of 1.1V and carries a CAS latency of 40. No heat spreader is fitted, so ensure adequate airflow inside the case.

Check motherboard DDR5 support

Verify that your board accepts DDR5 DIMMs and can operate at 5600 MT/s with 1.1V modules. Consult the manual for approved population rules and channel configuration before ordering.

Highlights

  • 8 GB capacity lets you run more applications at once
  • DDR5 5600 speed moves data at 5600 MT/s
  • 1 V operation keeps power draw low
  • 288-pin DIMM fits standard desktop slots
  • 1Rx16 single-rank layout supports broad compatibility

Specifications

BrandA-Tech
SeriesCompatible Replacement for Micron MTC4C10163S1UC56BD1
ModelA-Tech 8GB DDR5-5600 Desktop RAM Module
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Micron MTC4C10163S1UC56BD1

Questions about this item

How do I confirm the module runs at 5600 MT/s with CL40 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s and the CAS latency shows 40 at 1.10 V.

What comes in the package and is anything else required?

The box contains one 8 GB DDR5 288-pin DIMM with Micron chipset and green/black PCB; no heat spreader or extra cables are included and nothing else is needed for installation.

Which version should I choose if my board calls for a 1Rx16 non-ECC DDR5 DIMM at 5600?

This single 8 GB 1Rx16 unbuffered module matches that exact specification; select it when you need one rank at the standard 1.1 V DDR5 voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.