저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

APC

APC AP4430 Rack ATS 200/208V 20A L6-20 8xC13 1xC19 1U PDU

SKU CH-7MYD-Z92QB MPN AP4430

Rack-mount automatic transfer switch delivering redundant 200/208 V power to single-corded gear via eight C13 and one C19 outlets

  • TypeBasic
  • Rack Size1U
  • CertificationsEN 55022 Class A, FCC Part 15 Class A
  • Input Voltage200V, 208V
  • Input Frequency50/60 Hz
  • Maximum Input Current20A
  • Redundant dual-input power protects single-corded equipment from source failure
  • Automatic transfer switches between sources without interrupting critical loads
  • Eight C13 and one C19 outlets deliver 200/208V power to rack devices
  • 1U rack-mount form factor preserves space in dense server cabinets
  • Remote management via Web, SNMP or Telnet enables off-site monitoring

Rack ATS 1U Dual Input

The APC AP4430 is a rack-mount automatic transfer switch that provides redundant power to single-corded equipment. It accepts two 200V or 208V AC sources and switches seamlessly between them without interrupting connected loads. The unit occupies 1U of rack space and includes an 8.0-foot input cord with a NEMA L6-20P plug.

20A Input 16A Derated Output

Maximum input current is rated at 20A while the regulatory derated input current is 16A, defining the continuous load ceiling. Nine output receptacles are provided: eight IEC 320 C13 outlets and one IEC 320 C19 outlet, all delivering battery-backed power. The switch operates at 50 or 60 Hz and supports input voltages of 200V and 208V.

Network Management 45°C Operation

Built-in network connectivity enables remote management through Web, SNMP, or Telnet interfaces for monitoring and control. The operating temperature range spans -5 to 45 degrees Celsius with relative humidity from 5 to 95 percent non-condensing. Certifications include EN 55022 Class A and FCC Part 15 Class A for electromagnetic compatibility.

주요 특징

  • Redundant dual-input power protects single-corded equipment from source failure
  • Automatic transfer switches between sources without interrupting critical loads
  • Eight C13 and one C19 outlets deliver 200/208V power to rack devices
  • 1U rack-mount form factor preserves space in dense server cabinets
  • Remote management via Web, SNMP or Telnet enables off-site monitoring

사양

BrandAPC
ModelAP4430
TypeBasic
Rack Size1U
CertificationsEN 55022 Class A, FCC Part 15 Class A
Input Voltage200V, 208V
Input Frequency50/60 Hz
Maximum Input Current20A
Regulatory Derated Input Current16A
Input Connector(s)NEMA L6-20P
Cord Length8.0 Feet
Output Voltage200V, 208V
Output Connector(s)1 x IEC 320 C19 (Battery Backup)
8 x IEC 320 C13 (Battery Backup)
Operating Environment-5 - 45 Degree Celcius
Operating Relative Humidity5 - 95%
Operating Elevation0 - 3000 m
Storage Temperature-25 - 65 Degree Celcius
Storage Relative Humidity5 - 95%
Storage Elevation0 - 15000 m
FeaturesRack-Mountable
Occupys only 1U of valuable rack space. Puts the power where it is needed most - in the rack near the equipment.
Dual Input Power Sources
Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.
Information Displays
Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow f
Dimensions1.72" x 17.00" x 9.30"
Weight10.65 lbs.
배송 무게5.90 kg
포장 크기508 × 312 × 120 mm

이 상품에 대한 질문

Will the AP4430 draw 16 A from my existing 200 V L6-20 circuit without tripping?

The regulatory derated input is 16 A at 200 V or 208 V, so a 20 A L6-20 feed stays within its continuous rating.

How can I confirm the automatic transfer is functioning after I rack-mount the AP4430?

Connect to the built-in network interface and watch the Web or SNMP dashboard show primary and secondary source status during a simulated outage.

Does the AP4430 ship with the 8.0 ft L6-20 input cord and all mounting hardware?

Yes, the 8.0 ft NEMA L6-20P cord is attached; rack-mount brackets are included, while IEC C13 and C19 output cables are sold separately.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.