SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502448BTC
재고 있음
Athena Power
Athena Power AP-PS3280P868 800W PS2 server power supply
Delivers 800W of 80 PLUS Platinum efficient power in a standard PS2 form factor with integrated cooling fan, PCIe 5.0 ready P5 connector.
- TypeATX
- Single/RedundantSingle
- Maximum Power800W
- Fans1
- Main Connector20+4Pin
- Output Current+3.3V@18A, +5V@18A,+12V@64A, [email protected] , [email prot
- 800W stable output powers demanding workstations
- 80 PLUS Platinum efficiency above 92% cuts energy waste
- PCIe 5.0 ready P5 16-pin connector supports modern GPUs
- Standard PS2 form factor 140 x 150 x 85 mm fits existing chassis
- MTBF 100,000 hours at full load ensures long-term reliability
Industrial workstation power
The Athena Power AP-PS3280P868 is an 800W PS2 server power supply built for industrial and workstation systems that demand continuous, stable output. It carries 80 PLUS Platinum certification and IEC/UL 62368-1 safety approval, making it suitable for environments where efficiency and compliance are required.
PS2 form factor integration
The unit fits a standard PS2 chassis measuring 140 x 150 x 85 mm and includes a single integrated cooling fan for thermal management. It accepts a wide 100-264V AC input range at 47-63 Hz, allowing deployment across global power grids without additional configuration.
Legacy redundancy replacement
This single-unit design replaces older redundant PS2 modules where a non-redundant 800W solution is now sufficient, and it adds a P5 16-pin connector for PCIe 5.0 graphics support. It is not for builders who need hot-swap redundancy or systems that require a different form factor.
주요 특징
- 800W stable output powers demanding workstations
- 80 PLUS Platinum efficiency above 92% cuts energy waste
- PCIe 5.0 ready P5 16-pin connector supports modern GPUs
- Standard PS2 form factor 140 x 150 x 85 mm fits existing chassis
- MTBF 100,000 hours at full load ensures long-term reliability
사양
| Brand | Athena Power |
|---|---|
| Series | PS2 |
| Model | AP-PS3280P868 |
| Type | ATX |
| Single/Redundant | Single |
| Maximum Power | 800W |
| Fans | 1 |
| Main Connector | 20+4Pin |
| Output Current | +3.3V@18A, +5V@18A,+12V@64A, [email protected] , [email protected] |
| Output | +3.3V, +5V,12V, -12V, +5Vsb |
| Input Voltage | 100 - 264 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 13A@110V, 6A@ 240V |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Efficiency | > 92% |
| Hold-up Time | 17 ms Minimum at Nominal Input Voltage |
| Protection | OCP, OVP, |
| Features | Rise time: Less than 20 ms |
| Dimensions | (D x W x H) 140 x 150 x 85 mm / 5.5 x 5.9 x 3.4 in |
| Weight | 4.2 lbs |
| Humidity | 20%-90% |
| Temperature | Operating: 0°C ~ +55°C on Full Load; Storage & Shipping: -25°C ~ +85°C |
이 상품에 대한 질문
How long can the AP-PS3280P868 run at 800 W before the 100,000-hour MTBF limit becomes a concern?
MTBF is rated at 100,000 hours at maximum load and +25 °C, so sustained 800 W operation at room temperature stays within that design target.
What noise and heat should I expect from the single fan when the supply runs at full load all day?
The 80 PLUS Platinum rating means over 92 % efficiency, so waste heat is minimised; the integrated fan is the only active cooling and will run continuously under full load.
Which motherboard power connectors must my system already have to use this PS2 unit?
Your motherboard needs a 20+4 pin ATX socket, an EPS 8-pin (or 4+4) CPU socket, and at least one PCIe 6+2 or 8-pin connector for graphics; the unit also provides SATA and Molex leads for drives.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
