저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green 240-pin DDR3 DIMMs with gold contacts

Axiom

Axiom EM4D-AX 2 x 32 GB DDR3 1066 ECC Registered server RAM

SKU CH-BMHG-Z3KNV MPN EM4D-AX

64 GB DDR3 ECC registered kit, two 32 GB modules at 1066 MHz CL9 and 1.35 V

  • Capacity2 x 32 GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • ECC Registered design detects and corrects memory errors
  • DDR3 1066 speed rated at PC3 8500 bandwidth
  • Low 1.35 V operation reduces power draw
  • CAS latency CL9 for responsive access timing

64 GB DDR3-1066 registered kit

This kit provides 64 GB of DDR3-1066 memory using two 32 GB registered DIMMs. It is built for servers that require ECC error correction and registered signal processing. The modules run at 1.35 V with a CAS latency of CL9. They use the standard 240-pin form factor.

Suited for DDR3 servers needing ECC registered DIMMs

Systems that accept DDR3 registered ECC modules at 1066 MHz can use this kit. It will not work in platforms that require unbuffered non-ECC memory or a different DDR generation. Builders needing higher frequencies or lower voltages should look elsewhere.

1066 MHz DDR3 speed (PC3-8500)

The memory operates at 1066 MHz, rated as PC3-8500. This speed determines whether the modules match the server's memory bus. Verify the platform supports DDR3-1066 registered ECC before purchase.

주요 특징

  • 64 GB total capacity from two 32 GB modules
  • ECC Registered design detects and corrects memory errors
  • DDR3 1066 speed rated at PC3 8500 bandwidth
  • Low 1.35 V operation reduces power draw
  • CAS latency CL9 for responsive access timing

사양

BrandAxiom
ModelEM4D-AX
Capacity2 x 32 GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
배송 무게0.09 kg
포장 크기152 × 76 × 25 mm

이 상품에 대한 질문

Does my server need 240-pin DDR3 slots and support for 1.35 V registered ECC DIMMs to use this kit?

Yes, each module is a 240-pin DDR3 DIMM rated at 1.35 V with ECC and registered signal processing, so the motherboard must provide DDR3 slots that accept registered ECC memory at that voltage.

Can I run these 1066 MHz CL9 modules in a system that currently uses slower DDR3 memory?

The kit operates at DDR3-1066 with CL9 timing; the memory controller will set a common speed for all installed DIMMs, so older slower modules will limit the kit to the lowest shared frequency.

How can I confirm the full 64 GB is recognised and ECC is active after installation?

Check the BIOS or UEFI memory information screen for 64 GB total capacity and ECC status enabled, then verify in the operating system with tools such as dmidecode or CPU-Z that show ECC correction active.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.