저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black rectangular 2.5 inch SATA SSD with silver label

Black Diamond Memory

Black Diamond Memory BDSSDS1T 1TB 2.5" SATA enterprise SSD

SKU CH-DW5Z-PZYFN MPN BDSSDS1T

A 2.5-inch 1 TB SATA enterprise SSD with 520 MB/s read and 460 MB/s write speeds and a 2,000,000-hour MTBF

  • Form Factor2.5"
  • Capacity1TB
  • Memory ComponentsTLC
  • InterfaceSATA III
  • ControllerMarvell 88SS9187
  • Max Sequential ReadUp to 520 MBps

Options 1TB

  • Up to 520 MB/s sequential read for fast data access
  • Up to 460 MB/s sequential write for quick file saves
  • 2 million hours MTBF for long-term reliability
  • Power-loss protection guards data during unexpected shutdowns
  • 5-inch SATA form factor fits standard drive bays

Enterprise SSD for SATA arrays

The Black Diamond Memory Sonic Series BDSSDS1T is a 1 TB 2.5 inch SATA III solid-state drive built with TLC NAND and a Marvell 88SS9187 controller. It targets server and storage-array builders who need reliable capacity on the legacy SATA bus. The 7 mm height fits standard drive bays and hot-swap trays.

SATA III throughput ceiling

The drive connects through the SATA III 6 Gbps interface, so sequential reads top out at 520 MBps and writes at 460 MBps. Random I/O and sustained writes will sit well below those peaks. Builders planning all-flash arrays must budget for the interface bottleneck rather than the NAND potential.

TLC endurance for mixed workloads

TLC flash trades write endurance for cost, making this model suited to read-heavy or mixed workloads rather than write-intensive logging or caching tiers. The 2 million hour MTBF rating supports always-on operation, but lifetime writes are limited by the memory technology. Choose a different drive class for heavy write duty.

주요 특징

  • Up to 520 MB/s sequential read for fast data access
  • Up to 460 MB/s sequential write for quick file saves
  • 2 million hours MTBF for long-term reliability
  • Power-loss protection guards data during unexpected shutdowns
  • 5-inch SATA form factor fits standard drive bays

사양

BrandBlack Diamond Memory
SeriesSonic Series
ModelBDSSDS1T
Form Factor2.5"
Capacity1TB
Memory ComponentsTLC
InterfaceSATA III
ControllerMarvell 88SS9187
Max Sequential ReadUp to 520 MBps
Max Sequential WriteUp to 460 MBps
MTBF2,000,000 hours
FeaturesFaster: System boot up and application loading speeds up to about 4x faster than typical HDDs
Reliable: Durable, with no moving parts leaving the SSD less likely to fail
Security: Will react to sudden power loss, protecting valuable data from corruption before it turns off
Economical: Optimized design allowing for a more affordable switch to SSD Multiple Capacities - For the more demanding workloads
Silent: Runs without noise
Resistance: Shock and vibration resistan
Operating Temperature0°C ~ +70°C
Height7.00mm
Width69.86mm
Depth100.50mm
배송 무게0.14 kg
포장 크기100 × 70 × 7 mm

이 모델의 다른 버전

같은 라인업에서 2개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I pick the 256 GB, 512 GB or 1 TB Sonic Series SSD?

The 1 TB model BDSSDS1T gives the most space for OS, applications and data on a single 2.5 inch SATA drive.

What does the 520 MBps sequential read mean for everyday server use?

It lets the Marvell 88SS9187 controller serve large files and boot images at near SATA III line speed, cutting load times versus mechanical drives.

Does the SATA III 6 Gbps interface limit the 460 MBps write rate in practice?

Yes, the SATA III ceiling caps sustained writes at the rated 460 MBps, so the drive cannot exceed that throughput regardless of workload.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.